Products

HANDLEBAR SPECIALIZED COCKPIT ROVAL RAPIDE 31.8X420/90MM The new HANDLEBAR SPECIALIZED COCKPIT ROVAL RAPIDE 31.8X420/90MM is much more than the fastest way to reach the finish line, as it offers great aerodynamic advantages, shaving four more watts from the ultra-fast combination of Rapide handlebar with Tarmac stem. The handlebar is aerodynamic, lightweight, stiff, and was designed in collaboration with the world’s top athletes as well as Retül Fit Specialized experts. The complete removal of components that connected the handlebar to the stem allowed the handlebar profile to be wing-shaped and provide both the maximum advantage in clean air at speeds encountered in long solo breaks and in solo sprints. A 4-watt improvement represents an advantage of 32 cm on a final 250 m sprint. When races are won by launching the bike, this is a winning difference.By removing the connection components between stem and handlebar, this cockpit is 50 g lighter (100 mm x 420 mm) than the Rapide handlebar with Tarmac stem combination. The cockpit is fully made of premium high-modulus carbon fiber that offers all the rigidity required for sprinters and has a higher rigidity-to-weight ratio than any two-piece system ever produced by Specialized.The 15 different combinations of stem and handlebar, all at -6 degrees, allow you to find the right seating position: the arc from top to drop has been shaped for wrist freedom of movement both in a high position and in an aerodynamic tucked position, while the bend and bevel return to the Rapide handlebar. HANDLEBAR SPECIALIZED COCKPIT ROVAL RAPIDE 31.8X420/90MM MAIN FEATURES: Designed with an aerodynamic profile for a 4-watt advantage, compared to a traditional aerodynamic handlebar. Made of high-modulus carbon fiber, titanium hardware. 15 combinations from 75mm x 380mm to 125mm x 440mm. Curve 125mm drop x 75mm reach, 4 degrees of flare at the drops. Angle: 6 degrees. Cable routing: Shimano, SRAM, Campagnolo (internal & electronic compatible). Compatible with Roval bolt on the computer mounting: code S219900058. Maximum load: 125 kg. ITEM CODE 21023-0633

SPECIALIZED EXPERT ROAD HANDLEBAR 31.8X44 LIGA SHALLOW Ergonomic road curve in aluminum. The hand transition from the handlebar to the brake levers is smooth and comfortable. HANDLEBAR SPECIALIZED EXPERT ROAD 31.8X44 ALLOY SHALLOW Made in Premium 2014 aluminum. The top of the handlebar is ergonomically shaped for maximum comfort and control and facilitates the hand transition from the high position to the controls. The reduced drop allows perfect handling even for small hands. Compatible with Shimano, Campagnolo and SRAM. Front profile optimized for two housing passes. Oversize diameter 31.8mm. Sizes 40/42/44cm center-to-center. Shallow bend, 123mm drop x 75mm reach.

SPECIALIZED HOVER ALLOY FLARE ROAD HANDLEBAR In terms of comfort and performance, every point of contact between the bike and the rider is extremely important. The Hover handlebar is made of Premium aluminum with differentiated thicknesses, for the right mix of lightness and rigidity. For comfort, saddle position is important, favored by the reduced drop. The particular upper profile is designed to satisfy a wide range of positions, and the 12-degree outward tilt of the ends provides more stability while riding. SPECIALIZED HOVER ALLOY FLARE ROAD HANDLEBAR MAIN FEATURES: 6061 aluminum with differentiated thicknesses 15mm rise Drop: 103mm Drop x 75mm Reach - 12 degrees of flare

HANDLEBAR SPECIALIZED HOVER EXPERT IN ALLOY The Specialized Hover Expert handlebar is designed to offer comfort and optimal performance while riding. Made from premium aluminum with differentiated thicknesses, this handlebar provides a perfect blend of lightness and stiffness. MANUBRIO SPECIALIZED HOVER EXPERT IN LEGA 42CM Material: Made from 2014 Premium aluminum with differentiated thicknesses, ensuring a sturdy yet light structure. Angle: The bar features a 15mm rise, enabling a comfortable and natural riding position. Shallow Drop: With a drop of 123mm and a reach of 75mm, this handlebar offers a comfortable and aerodynamic hand position. ARTICOLO CODE 21017-2042

SPECIALIZED ALLOY HANDLEBAR 15 MM RISE PLUS FLARE 44 CM In terms of comfort and performance, every contact point between the bike and the rider is extremely important. The Hover handlebar is made from Premium aluminum with differentiated thicknesses, for the right balance of lightness and rigidity. For comfort, saddle position is important, aided by the reduced drop. The particular upper profile is designed to satisfy a wide range of positions, and the 12-degree outward tilt of the ends allows greater stability while riding. SPECIALIZED ALLOY HANDLEBAR 15 MM RISE PLUS FLARE 44 CM MAIN FEATURES: 6061 aluminum with differentiated thicknesses. 12-degree flare. Drop: 103mm Drop x 75mm Reach - 12 degrees of flare. ARTICLE CODE 21018-3044

SPECIALIZED ROVAL CONTROL SL HANDLEBAR COCKPIT 80MMX780MM The Roval Control SL cockpit is a high-engineering piece designed for XC, for the athlete who prefers total integration for explosive efforts. It is made from high-modulus carbon fiber. On the World Cup circuit there is no other product with the same combination of lightness, stiffness, and control. The width, rise, extension, and tilt of the Roval Control SL cockpit were studied together with the athletes of the S-Racing Factory XC Team to ensure every rider the perfect position to unleash maximum power and tackle the most technical descents. No matter if you race in the World Championship or just ride local trails, with four reach lengths to choose from, it will be easy to find the cockpit that’s right for you. SPECIALIZED ROVAL CONTROL SL HANDLEBAR COCKPIT 80MMX780MM MAIN FEATURES: Material: High-modulus carbon fiber Width 780mm (with markings to customize) Rise 0mm, with integrated mount -12 degrees Rear tilt: 8 degrees Upward tilt: 1 degree Titanium fasteners Weight 250 g (mount 70mm x width 780mm) Compatible with Roval stem for cycle computers S219900058 Maximum supported weight: 125kg. ITEM CODE 21123-1122

SPECIALIZED ROVAL RAPIDE HANDLEBAR 110X400MM Roval Rapide is much more than a simple way to reach the finish line. It is the fastest attack mechanism ever created, with major aerodynamic advantages. It was designed to offer a winning edge without compromise, in collaboration with the world's top athletes and Retül Fit experts. SPECIALIZED ROVAL RAPIDE HANDLEBAR 110X400MM MAIN FEATURES: Aerodynamic profile designed to deliver a 4-watt advantage over a traditional aerodynamic handlebar Made from high-modulus carbon fiber with titanium hardware, offering maximum stiffness and lightness Available in 15 different configurations from 75mm x 380mm to 125mm x 440mm, covering most race positions 125mm drop x 75mm reach curve, 4 degrees of flare at the drops, 6-degree angle, clamp diameter 31.8mm Weight of only 310 grams (100mm x 420mm), ensuring light and responsive performance Cable routing compatible with Shimano, SRAM, Campagnolo (internal and electronic) Compatible with Roval bolt on computer mount code S219900058 Maximum load capacity 125 kg, ideal for riders of different builds ARTICLE CODE 21023-0625

HANDLEBAR SPECIALIZED ROVAL RAPIDE 110X420MM Roval Rapide is much more than the fastest way to reach the finish line. It is the fastest attacking means we have ever built, with major aerodynamic advantages, shaving another four watts from the ultra-fast combination of Rapide handlebars with Tarmac stem. But to offer an advantage that wins, more than pure aerodynamics is required. The objective for the Roval engineering team was simple: the Rapide Cockpit had to be the fastest handlebar we have ever made, with no compromises. It is aerodynamic, light, stiff, and designed in collaboration with the world’s best athletes and our Retül Fit experts, so you can seize the victory. HANDLEBAR SPECIALIZED ROVAL RAPIDE 110X420MM CARATTERISTICHE PRINCIPALI: Designed with an aerodynamic profile for a 4-watt advantage over a traditional aerodynamic handlebar. Made from high-modulus carbon fiber, with titanium hardware, offering the ideal stiffness for the largest and fastest sprinters on the World Tour. Offers 15 different combinations of handlebar clamp and bar, all at -6 degrees, covering the vast majority of race positions. 125mm drop x 75mm reach curve, 4 degrees of flare at the drops, 6-degree angle, clamp diameter 31.8mm. Weight of 310 grams (100mm x 420mm), with cable routing compatible with Shimano, SRAM, Campagnolo (internal and electronic compatibility). Compatible with Roval bolt on the computer mount code S219900058, with a maximum load capacity of 125 kg. ARTICOLO CODICE 21023-0635

SPECIALIZED ROVAL RAPIDE HANDLEBAR 135MM X 420MM The MANUBRIO SPECIALIZED ROVAL RAPIDE 31.8X420MM 135MM, lightweight and aerodynamic, is perfect for quickly reaching the finish line. The handlebar was developed in collaboration with the top athletes of the Specialized team and with the Retül Fit team and is aerodynamic, lightweight, and stiff: the perfect mix to seize victory. The absence of interconnecting components between the handlebar and the stem allows for an airfoil profile. A 4-watt improvement may seem small, but it translates into a 32 cm advantage on a final 250 m sprint. When races are won by launching the bike, this is a winning difference. Without the interconnecting components between the handlebar and stem, the Cockpit Rapide is 50 g lighter (100 mm x 420 mm) than the Rapide handlebar with a Tarmac stem combination. The handlebar is made of premium high-modulus carbon fiber, providing the ideal stiffness for the world’s biggest and fastest sprinters and has a stiffness-to-weight ratio higher than any two-piece system ever built by Specialized. The 15 different combinations of handlebar and stem, all at -6 degrees, cover most race positions. The rise from top to drop has been sculpted for wrist freedom both when pedaling off-seat and in an aerodynamic position. SPECIALIZED ROVAL RAPIDE HANDLEBAR 135MM X 420MM MAIN FEATURES: Designed with an aerodynamic profile for a 4-watt advantage, compared to a traditional aerodynamic handlebar. Made of high-modulus carbon fiber, titanium hardware. 15 combinations from 75mm x 380mm to 125mm x 440mm 125mm drop x 75mm reach curve, 4 degrees flare at drops Angle 6 degrees Weight 310 grams (100mm x 420mm) Cable routing Shimano, SRAM, Campagnolo (internal & electronic compatible) Compatible with Roval bolt on computer mount code S219900058. Maximum load 125 kg. ARTICLE CODE 21023-0638

SPECIALIZED ROVAL RAPIDE HANDLEBAR 31.8 x 380 75MM The SPECIALIZED ROVAL RAPIDE HANDLEBAR 31.8 x 380 75MM, lightweight and aerodynamic, is perfect for quickly reaching the finish line. The handlebar was developed in collaboration with the best athletes from the Specialized team and with the Retül Fit team and is aerodynamic, lightweight and stiff: the perfect combination to seize victory. The absence of the linkage components between the handlebar and the stem allows for an airfoil profile. A 4-watt improvement may seem small, but it results in a 32 cm advantage on a 250 m final sprint. When races are won by sprinting with the bike, this is a winning difference. Without the linkage components between the handlebar and stem, the Cockpit Rapide is 50 g lighter (100 mm x 420 mm) compared to the Rapide handlebar with Tarmac stem combination. The handlebar is made from premium high-modulus carbon fiber, which provides the ideal stiffness for the biggest and fastest sprinters on the World Tour and has a higher stiffness-to-weight ratio than any two-piece system ever produced by Specialized. The 15 different combinations of handlebar stem and handlebar, all at -6 degrees, cover most race positions. The upward-to-downward radius has been sculpted for wrist freedom of movement both when pedaling out of the saddle and in aerodynamic position. SPECIALIZED ROVAL RAPIDE HANDLEBAR 31.8 x 380 75MM MAIN FEATURES: Designed with an aerodynamic profile for a 4-watt advantage over a traditional aerodynamic handlebar. Made from high-modulus carbon fiber, titanium small parts. 15 combinations from 75mm x 380mm to 125mm x 440mm Curve 125mm drop x 75mm reach, 4 degrees of flare at the drops Angle 6 degrees Weight 310 grams (100mm x 420mm) Cable routing for Shimano, SRAM, Campagnolo (internal & electronic compatible) Compatible with Roval bolt on the computer mount code S219900058. Maximum load 125 kg. ARTICLE CODE 21023-0612

HANDLEBAR SPECIALIZED ROVAL RAPIDE 31.8X42 The HANDLEBAR SPECIALIZED ROVAL RAPIDE 31.8X42 is perfect for those who want to ride fast. The handlebar is the first point on the bike hit by wind: if you want to save 20 seconds over a distance of 40 km the rapide handlebar is perfect. This handlebar has been designed and tested in Specialized's wind tunnel, slices through wind like a knife, is very comfortable and the worked surface provides excellent grip even when wet. It weighs only 225 grams and is the lightest handlebar in its category. HANDLEBAR SPECIALIZED ROVAL RAPIDE 31.8X42 MAIN FEATURES: Compared to a round handlebar, the aerodynamic profile provides a savings of over w0 seconds over a distance of 40 km. Made from high modulus carbon fibers with a weight of only 225 g (size 42 cm). Worked surface. Widths (center-to-center) 42 cm. 125mm drop x 75mm reach. ARTICLE CODE 21022-0442

HANDLEBAR SPECIALIZED ROVAL RAPIDE 31.8X44 The HANDLEBAR SPECIALIZED ROVAL RAPIDE 31.8X44 is perfect for riders who want to ride fast. The handlebar is the first part of the bike to be hit by wind: if you want to save 20 seconds over a distance of 40 km, the Rapide handlebar is perfect. This handlebar has been designed and tested in Specialized’s wind tunnel, slices through wind like a knife, is very comfortable, and the machined surface provides excellent grip even when wet. It weighs only 225 grams and is the lightest handlebar in its category. HANDLEBAR SPECIALIZED ROVAL RAPIDE 31.8X44 MAIN FEATURES: Compared to a round handlebar, the aerodynamic profile provides a savings of over w0 seconds over 40 km. Made from high-modulus carbon fibers with a weight of only 225 g (size 42 cm). Machined surface. Widths (center-to-center) 44 cm. 125mm drop x 75mm reach. ARTICLE CODE 21022-0444

HANDLEBAR SPECIALIZED ROVAL RAPIDE COCKPIT 115X380MM The new Roval Rapide Cockpit is much more than the fastest way to reach the finish line. It is the fastest attack medium we have ever created, with major aerodynamic advantages, shaving another four watts from the incredibly fast combination of Rapide handlebars with Tarmac stem. But to offer an advantage that wins, more is required than pure aerodynamics. The objective for the Roval engineering team was simple: the Rapide Cockpit had to be the fastest handlebars we have ever made, with no compromises. It is aerodynamic, lightweight, rigid, and designed in collaboration with the world's top athletes and our Retül Fit experts, so you can grab victory. HANDLEBAR SPECIALIZED ROVAL RAPIDE COCKPIT 115X380MM key features: AERODYNAMICS: removing the junction components between the handlebar stem and the handlebar allowed us to shape the handlebar profile as a wing. Optimized to provide maximum advantage in clean air at speeds observed in long solo breakaways and World Tour sprints. LIGHTWEIGHT AND RIGID: Made from premium high-modulus carbon fiber, it offers the ideal stiffness for the largest and fastest sprinters on the World Tour. 50 grams lighter than the combination of Rapide handlebar with Tarmac stem. POSITION: Offers 15 different stem/handlebar combinations, all at -6 degrees, to cover most race positions. The rise from top to drop is sculpted for wrist freedom of movement both in attack position and tucked in an aerodynamic position. Designed with an aerodynamic profile for a 4-watt advantage over a traditional aerodynamic handlebar. Made from high-modulus carbon fiber, titanium small parts. 15 combinations from 75mm x 380mm to 125mm x 440mm. Curve 125mm drop x 75mm reach, 4 degrees of flare at the drops. Angle 6 degrees. Clamp diameter 31.8mm. Weight 310 grams (100mm x 420mm). Internal routing for Shimano, SRAM, Campagnolo (internal & electronic compatible). Compatible with Roval bolt on computer mount S219900058. Maximum load capacity 125 kg.

HANDLEBAR SPECIALIZED ROVAL RAPIDE COCKPIT 125MM X 440MM The new Roval Rapide Cockpit is much more than a simple way to reach the finish line. It is the fastest assault platform ever created, designed to offer a winning edge with substantial aerodynamic advantages. This handlebar was created with the goal of being the fastest ever made, with no compromises. It is aerodynamic, light, stiff, and designed in collaboration with the world's best athletes and Retül Fit experts to ensure winning performance. The Roval Rapide Cockpit is the perfect choice for riders seeking an aerodynamic edge and uncompromising performance. HANDLEBAR SPECIALIZED ROVAL RAPIDE COCKPIT 125MM X 440MM MAIN FEATURES: Designed with an aerodynamic profile for a 4-watt advantage over a traditional aerodynamic handlebar. Made from high-modulus carbon fiber, with titanium hardware, offering the ideal stiffness for the World Tour's biggest and fastest sprinters. 125mm drop x 75mm reach curve, 4 degrees of flare at the drops, 6-degree angle, clamp diameter 31.8mm. Weight of 310 grams (100mm x 420mm), with cable routing compatible with Shimano, SRAM, Campagnolo (internal and electronic). Compatible with Roval bolt on the computer mount code S219900058, with a maximum load capacity of 125 kg. ARTICOLO CODE 21023-0647

HANDLEBAR SPECIALIZED ROVAL RAPIDE COCKPIT 135MMX400MM Roval Rapide - the fastest handlebars ever madeThe new Roval Rapide Cockpit is much more than the fastest way to reach the finish line. It is the fastest attacking means we’ve ever created, with great aerodynamic advantages, shaving four more watts off the ultra-fast combination of Rapide handlebars with Tarmac stem. But to offer a winning advantage, more is required than pure aerodynamics. The objective for the Roval engineering team was simple: the Rapide Cockpit had to be the fastest handlebars ever made, with no compromises. It is aerodynamic, light, stiff, and conceived in collaboration with the world’s top athletes and Retül Fit experts, so as to seize victory. AerodynamicsThe removal of the linking components between the handlebar stem and the handlebar allowed the profile of the handlebar to be designed with a wing-like shape. This airfoil has been optimized to provide the maximum advantage in clean air at speeds observed in long solo breakaways and also in full-sprint World Tour stages. While a four-watt improvement may seem small, it translates into a 32 cm advantage in a final 250 m sprint. When races are won by launching the bike, this is a winning difference. Lightweight and stiffBy removing the linking components of the stem-to-handlebar connection, the Rapide Cockpit is 50 grams lighter (100 mm x 420 mm) than the Rapide handlebar with a Tarmac stem. Made from premium high-modulus carbon fiber, which offers the ideal stiffness for the biggest and fastest sprinters in the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two-piece system Roval has ever made. PositioningThe drawback of one-piece cockpits has long been the positioning, but Roval has collaborated with Retül Fit professionals and top athletes to ensure nearly all cyclists can find their proper saddle position. Offering 15 different combinations of handlebar stem and handlebar, all at -6 degrees, thus covering most race positions. The top-to-drop radius has been sculpted for wrist freedom both in out-of-saddle and in a tucked aerodynamic position, while curvature and beveling reflect the Rapide handlebar’s preferred shape. “The new Roval Rapide Cockpit is very aerodynamic, but the most important thing is its lightness combined with stiffness and control.” Fabio Jakobsen. “Now I ride so fast downhill that I’m almost afraid!” Demi Vollering. “When the control is perfect, and the feel is great, I don’t need to think. I just know I’m faster.” Lotte Kopecky. HANDLEBAR SPECIALIZED ROVAL RAPIDE COCKPIT 135MMX400MM MAIN FEATURES: Designed with an aerodynamic profile for a 4-watt advantage, compared to a traditional aerodynamic handlebar. Made from high-modulus carbon fiber, with titanium hardware. 15 combinations from 75mm x 380mm to 125mm x 440mm. 125mm drop x 75mm reach curvature, 4 degrees of bevel at the drops. Angle: 6 degrees. Clamp diameter: 31.8mm. Cable routing: Shimano, SRAM, Campagnolo (internal & electronic compatible). Compatible with Roval bolt on computer mount: code S219900058. Maximum load: 125 kg. Includes: computer mount and GoPro adapters, headset cap.

SPECIALIZED ROVAL RAPIDE HANDLEBAR COCKPIT 90X380MM The new Roval Rapide Cockpit is much more than the fastest way to reach the finish line. It’s the fastest attacking tool we’ve ever built, with major aerodynamic advantages, shaving another four watts from the ultrafast Rapide handlebar combined with the Tarmac stem. But to offer a winning edge, more is needed than pure aerodynamics. The goal for the Roval engineering team was simple: the Rapide Cockpit had to be the fastest handlebar we’ve ever built, with no compromises. It is aerodynamic, lightweight, stiff, and designed in collaboration with the world’s best athletes and our Retül Fit experts, so you can seize the victory. SPECIALIZED ROVAL RAPIDE HANDLEBAR COCKPIT 90X380MM key features: AERODYNAMICS: removing the linking components between the handlebar clamp and the bar allowed us to design the handlebar profile in an airfoil shape. We optimized this airfoil to provide maximum advantage in clean air at speeds encountered in long solo breakaways and even in full-out World Tour sprints. While a four-watt improvement may seem small, it translates to a 32 cm advantage in the final 250 m sprint. When races are won by launching the bike, this is a decisive difference. LIGHTWEIGHT AND RIGID: By removing the clamp components of the stem-to-bar connection, the Rapide Cockpit is 50 grams lighter (100 mm x 420 mm) than the Rapide bar with a Tarmac stem. Made from premium high-modulus carbon fiber, delivering the ideal stiffness for the biggest and fastest sprinters on the World Tour, the Rapide Cockpit has a stiffness-to-weight ratio higher than any two-piece system we have ever built. POSITION: The drawback of one-piece cockpits has long been positioning, but we collaborated with our Retül Fit professionals and top athletes to ensure nearly all riders can find their proper saddle position. We offer 15 different combinations of handlebar clamp and handlebar, all at -6 degrees, covering most race positions. The top-to-drop reach has been sculpted for wrist freedom both in out-of-saddle and tucked aerodynamic positions, while curvature and cut reflect our favorite Rapide handlebars. Designed with an aerodynamic profile for a 4-watt advantage versus a traditional aerodynamic handlebar. Made from high-modulus carbon fiber, titanium hardware. 15 combinations from 75mm x 380mm to 125mm x 440mm 125mm drop x 75mm reach curve, 4 degrees of drop flare 6-degree angle Clamp diameter 31.8mm Weight 310 grams (100mm x 420mm) Cable routing for Shimano, SRAM, Campagnolo (internal & electronic compatible) Compatible with Roval bolt on the computer mount, code S219900058. Maximum load 125 kg.

HANDLEBAR SPECIALIZED ROVAL RAPIDE COCKPIT 90X400MM The new Roval Rapide Cockpit is far more than the fastest way to reach the finish line. It is the fastest attacking tool we’ve ever built, with major aerodynamic advantages, shaving an additional four watts from the ultra-fast Rapide handlebar combined with the Tarmac stem. But to offer a winning edge, there’s more to it than pure aerodynamics. The goal for the Roval engineering team was simple: the Rapide Cockpit had to be the fastest handlebar we’ve ever made, with no compromises. It is aerodynamic, lightweight, stiff, and designed in collaboration with the world’s best athletes and our Retül Fit experts, so you can seize victory. HANDLEBAR SPECIALIZED ROVAL RAPIDE COCKPIT 90X400MM KEY FEATURES: AERODYNAMICS: removing the linking components between the handlebar clamp and the bar allowed us to design the bar profile in an airfoil shape. We optimized this airfoil to provide maximum clean-air benefit at speeds encountered in long solo breaks and even in full World Tour sprints. While a four-watt improvement may seem small, it translates to a 32 cm advantage on a final 250 m sprint. When races are won by launching the bike, this is a winning edge. LIGHTWEIGHT AND STIFF: By removing the stem-to-bar linking components, the Rapide Cockpit is about 50 grams lighter (100 mm x 420 mm) than the Rapide handlebar with a Tarmac stem. Made from premium high-modulus carbon fiber, which offers the ideal stiffness for the World Tour’s biggest, fastest sprinters, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two-piece system we have ever produced. POSITIONING: The drawback of one-piece cockpits has long been positioning, but we collaborated with our Retül Fit professionals and top athletes to ensure that nearly all riders can find their proper saddle position. We offer 15 different combinations of handlebar clamp and handlebar, all at -6 degrees, covering most race positions. The rise from top to the drops is sculpted for wrist freedom both in drop-out position and tucked in an aerodynamic position, while curvature and flare reflect our favorite Rapide handlebar. Engineered with an aerodynamic profile for a 4-watt advantage over a traditional aerodynamic handlebar. Made from high-modulus carbon fiber, titanium hardware. 15 configurations from 75mm x 380mm to 125mm x 440mm 125mm drop x 75mm reach curvature, 4 degrees flare at drops 6-degree angle Clamp diameter 31.8mm Weight 310 grams (100mm x 420mm) Cable routing for Shimano, SRAM, Campagnolo (internal & electronic compatible) Compatible with Roval bolt on the computer mount code S219900058. Maximum load 125 kg.