Products

HORIZONTAL FRAME BAG SPECIALIZED ENDURO 2020 S191500008 Replacement carbon horizontal sleeve for Enduro 2020. Material: FACT carbon Drop distance: 148x12mm Dropout type: through axle

HORIZONTAL CARBON FRAME COVER FOR STUMPJUMPER 2018-20 - SPECIALIZED S181500005 Replacement horizontal carbon hanger for Stumpjumper 2018-2020 (I1). Compatible with Stumpjumper bikes from 2018-2020 with 27.5"/29" wheels. Material: FACT carbon Drop distance: 148x12mm Dropout type: through axle CODE S181500005

REAR CARBON SEATSTAY FOR IN SPECIALIZED STUMPJUMPER 15 2025 Replacement carbon rear cover for Stumpjumper 15 2025. Compatible with 27.5" or 29" wheels and all frame sizes. Material: FACT 11M carbon Dropout spacing: 148x12mm Dropout type: through-axle

VERTICAL CARBON FENDER IN SPECIALIZED, 12X148MM, 29, S195000007 Vertical carbon droppers for Enduro 2020. Material: FACT carbon Dropper travel: 148x12mm Dropout type: thru-axle Rear derailleur hanger: Amazinger 2.1 - S172600003

FONDELLO ALPINESTARS PARAGON LITE SHORT WITH PROTECTIONS The shorts with ALPINESTARS PARAGON LITE SHORT WITH PROTECTIONS, lightweight and durable, are made in stretch mesh for maximum comfort and breathability. The internal silicone prints keep the short in place while memory foam pads on the thighs and tailbone protect from impacts. Suede reinforcement in the butt area for greater comfort. ALPINESTARS PARAGON LITE SHORT WITH PROTECTIONS MAIN FEATURES: Hip protection - EN 1621-1: 2012 Level 1. Lightweight, durable, snug and comfortable shorts. Memory foam pads on the thighs and tailbone. Suede reinforcement in the butt area for greater comfort. Soft mesh construction for maximum comfort. ARTICLE CODE 1657220

SADDLE ENDURA DONNA PADDED CLICKFAST LINER The SADDLE ENDURA DONNA PADDED CLICKFAST LINER is compatible with the Clickfast™ system and is made from quick-drying stretch fabric for optimal comfort. The 200 series saddle pad is comfortable, quick-drying, and provides maximum comfort while pedaling. Soft elastic comfort edge and waistband elastic. ARTICLE CODE E0162BK

ENDURA MT500 PROTECTOR CHAMOIS BICYCLE SHORT II The ENDURA MT500 PROTECTOR CHAMOIS BICYCLE SHORT II is a flexible protection perfect for wearing under all types of pants. In the event of an impact, the D3O® placement zones inside these shorts harden to protect the most delicate areas, dissipating all the energy of the fall away from the body; all while maintaining a slim profile that fits perfectly with all ClickFast pants. The shorts are equipped with the Mountain Stretch 500 series pad that fits the body perfectly thanks to the reticulated support foam which is also highly breathable, absorbs sweat and, together with the anti-bacterial finish, always keeps the skin fresh. ENDURA MT500 PROTECTOR CHAMOIS BICYCLE SHORT II MAIN FEATURES: High-absorption D3O® inserts for impacts positioned on the hips, lower leg area, and coccyx region. Antibacterial Mountain Stretch series 500 padding with highly breathable reticulated foam. Flatlock seams for greater durability and comfort. Seamless crotch in the front. Clickfast system. FABRICS: 45% polyamide (nylon). 37% polyester. 18% elastane (spandex). Lycra® fabric in durable, snug nylon.

FORK FOX 2022 FACTORY 36 FLOAT 27.5 F-S 160 GRIP2 HSC/LSC SBLK 15QRX110 R37 The FOX 2022 FACTORY FLOAT 36 27.5 F-S 160 GRIP2 HSC/LSC SBLK 15QRX110 R37 is perfect for mounting on Enduro and All Mountain MTB. The new lower-leg design reduces weight without compromising stiffness. The arch-shaped suspension design has been engineered to work perfectly with new Enduro and Downhill MTBs: the steerer tube profiles have become larger while the fork offsets are shorter. The Grip2 shock is easy to adjust, delivers unparalleled ride quality, and features the Variable Valve Control (VVC) technology that allows external adjustment of the suspensions. The EVOL technology increases the negative volume of the air spring, optimizing sensitivity to small impacts. The EVOL air spring’s linear curve provides top-end softness, extra mid-stroke support, and a bottom-to-top progression that’s easier to adjust. The advantages of EVOL technology have been further improved by the new lower-leg channels and bleed screws, which both work to reduce the pressure of air channeled into the lower legs, allowing the EVOL air spring to operate freely. FOX 2022 FACTORY 36 FLOAT 27.5 F-S 160 GRIP2 HSC/LSC SBLK 15QRX110 R37 MAIN FEATURES: Wheel size: 27.5". travel: 160 mm. Rake: 37. Axle: 15QR x 110. Upper tube finish: Kashima. Air channels: yes. Bleed screws: yes. Floating axle: yes. Rotor size: 180 direct Post Mount, compatible up to 230. Fender mounting: FOX 36/38 optional Fender with sturdy 4 direct-mount attachment. Air spring: EVOL. Steerer: 1.5 tapered. Starting weight: 1965 g. HOW TO ADJUST THE GRIP2 SHOCK: High-speed compression (w/VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (w/VVC) 8 clicks. Low-speed rebound 16 clicks. ARTICLE CODE 60X91020241

FOX 2022 FACTORY FLOAT 34 29 FRONT FORK F-S 140 GRIP2 HSC/LSC ORNG 15QRX110 R44 The FOX 2022 FACTORY FLOAT 34 29 FRONT FORK F-S 140 GRIP2 HSC/LSC ORNG 15QRX110 R44 is the smoothest, lightest, and easiest to tune fork in the world and is perfect for mounting on MTB Trail bikes. When a fork is compressed, the air volume inside the lower legs decreases, increasing air pressure. The more the fork is compressed, the higher the pressure becomes. This effect can undesirably prevent full travel. Fox fork channels, located at the bottom of the stanchions, help relieve this issue by dramatically increasing the air volume inside the lower legs, reducing pressure. The arch design is crafted to perfectly match modern trail bikes: the head tube profiles are larger while fork offsets are shorter. The Grip2 damper is easy to adjust, offers unmatched guidance, and is equipped with the Variable Valve Control (VVC) technology that allows external suspension adjustment. The EVOL air spring in the 34 fork now has an expanded negative air spring to help mid-stroke support. FOX 2022 FACTORY FLOAT 34 29 FRONT FORK F-S 140 GRIP2 HSC/LSC ORNG 15QRX110 R44 MAIN FEATURES: Wheel size: 29 in. Travel: 140 mm. Rake: 44. Axle: 15QR x 110. Upper tube finish: Kashima Coat. Rotor size: 180 direct Post Mount, compatible up to 180. Air spring: FLOAT EVOL. Steerer: 1.5 tapered. Starting weight: 1738 g (F-S, 34, 29", 130mm Travel, Kabolt 110, 3 Pos-Adj)*: * The fork weights listed are for 165 mm length with star nut and disc brake mount installed. All 34 forks have adjustable air spring pressure and rebound adjustment. HOW TO ADJUST THE GRIP2 DAMPER: High-speed compression (w/VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (w/VVC) 8 clicks. Low-speed rebound 16 clicks. PART NUMBER 60X91021003

FOX FORK 2022 FACTORY FLOAT 38 29 FULL SUSPENSION 160 GRIP2 HSC/LSC SBLK 15QRX110 R44 The FOX FORK 2022 FACTORY FLOAT 38 29 FULL SUSPENSION 160 GRIP2 HSC/LSC SBLK 15QRX110 R44 is built on 38 mm tubes with Kashima finish, a floating axle, a new arch design, and lower venting to release accumulated pressure.Floating axles offer a clear performance advantage by matching the exact width of the wheel mounting surface of the fork to the front hub flange spacing, aligning the frame perfectly and eliminating friction between the upper and lower fork stanchions.The elliptical head tube optimizes rigidity relative to weight, adding material only where needed, eliminating every unnecessary gram. FOX FORK 2022 FACTORY FLOAT 38 29 FULL SUSPENSION 160 GRIP2 HSC/LSC SBLK 15QRX110 R44 MAIN FEATURES: Wheel size: 29". Travel: 160 mm. Rake: 44. Axle: 15QR x 110. Upper tube finish: Kashima Coat. Air channels: yes. Bleeding/drainage: yes. Floating axle: yes. Rotor size 180 direct mount. Compatible up to 230. FLOAT EVOL air spring. Conical 1.5 steer tube. Internally elliptical. Starting weight: 2180 g. ADJUSTMENT High-speed compression (w/VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (w/VVC) 8 clicks. Low-speed rebound 16 clicks. ARTICLE CODE 60X91021024

FORK FOX 2023 34 FLOAT 29 FULL-SUSPENSION 140 GRIP2 HSC/LSC SBLK 15QRX110 R44 The 2023 Fox 34 is the Trail fork that does it all. Smoother, lighter, more adjustable and more capable than ever: when it comes to a “do-it-all” trail fork, the 34 is a class of its own. When the fork compresses, the air volume inside the lower legs decreases, increasing air pressure. The more the fork compresses, the more the pressure rises. This effect can unintentionally prevent full travel from being reached. Fox channels help relieve this issue by drastically increasing the air volume inside the lower leg and thus reducing the amount of unwanted additional pressure ramps. Oil circulates in the top part of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its stroke. The arch design has been shaped to pair perfectly with modern Enduro and Downhill bikes. The head tube profiles have grown larger and fork offsets have become shorter. The new arch shape accounts for this, protruding forward to provide ample space for the head tube at maximum compression. The GRIP2 damper is easy to dial in and offers ultra-precise ride quality. The patented Variable Valve Control (VVC) technology allows simple external adjustment with the turn of a knob. Returning with the same legendary suppleness and longevity, the EVOL air spring in the 34 version now features a larger negative air spring to aid mid-stroke support. FOX 2023 34 FLOAT 29 F-S 140 GRIP2 HSC/LSC SBLK 15QRX110 R44 KEY FEATURES: Wheel size: 29. Travel: 140 mm. Rake: 44. Axle: 15QR x 110. Upper tube finish: Kashima Coat. Disc brake size: from 180 to 203 mm. Air spring: FLOAT EVOL. Steerer: 1.5T tapered. Weight (approx): 1738 g. PART CODE 910-21-001

FORK FOX 2023 FLOAT 38 27.5 FORK 170 GRIP2 HSC/LSC ORNG 15QRX110 R44 The FORK FOX 2023 FLOAT 38 27.5 FORK 170 GRIP2 HSC/LSC ORNG 15QRX110 R44 is the long-travel Enduro fork specialist. With 170 mm of travel and the same revolutionary features as the 36, the 38 redefines the characteristics of a long-travel single-crown fork and sets a new benchmark in safety, performance, and durability.Floating axles on this fork provide a clear performance advantage due to their unique ability to align the exact wheel mounting surface width with the front hub flange spacing, creating perfect frame alignment and eliminating unwanted friction between the upper and lower stanchions. Floating axles ensure much smoother suspension movement throughout the fork’s travel, greatly improving feel and overall ride quality.The fork is equipped with a new quick-release floating axle system with a lever, patent-pending, combining the benefits of a floating axle with the ease of an tool-free quick release. With this system, spacing is locked by a floating steerer, allowing removal and reinstallation of the front wheel repeatedly while maintaining perfect fork alignment. The floating axle positioning is factory pre-set, so if you’re not sure how to use the floating axle system or simply don’t want to deal with it, you can simply install the front wheel and continue your ride. When the fork compresses, the air volume inside the lower legs decreases, increasing air pressure. The more the fork compresses, the higher the pressure rises. This effect can unintentionally prevent full travel from being reached. Fox channels help relieve this issue by drastically increasing the air volume inside the lower leg and thus reducing the amount of unwanted additional pressure ramps.Oil circulates in the top of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends during its travel. Bleeds, located on the bottom of the legs, allow equal atmospheric pressure distribution with the simple push of a button. The buildup of pressure in the lower tips drastically reduces fork performance, preventing full travel and diminishing sensitivity and responsiveness to small bumps. The lower part of the fork is designed to shed every possible gram without compromising stiffness and the strength required by modern enduro and gravity bikes. The arch-shaped design is engineered to pair perfectly with modern Enduro and Downhill bikes. Steering tube profiles have grown larger and fork offsets shorter. The new arch shape accounts for this need, protruding forward to provide ample space for the steering tube at full compression. The GRIP2 damper is easy to tune and provides ultra-precise ride. The patented Variable Valve Control (VVC) technology allows simple external adjustment with a simple twist of a dial. EVOL technology increases the negative air spring volume, optimizing small-bump sensitivity. The EVOL air spring’s linear curve provides softer initial travel, greater mid-stroke support, and a more adjustable ramp-up. EVOL advantages are further emphasized by the fork’s new bleed channels which help reduce trapped air pressure in the lower legs, allowing the EVOL air spring to operate freely without unwanted interference. FORK FOX 2023 FLOAT 38 27.5 FORK 170 GRIP2 HSC/LSC ORNG 15QRX110 R44 MAIN SPECIFICATIONS: Wheel size: 27.5. Travel: 180 mm. Rake: 44. Axle: 15QR x 110. Upper finish: Kashima Coat. Air channels: yes. Bleeds: yes. Brake disc size: from 180 to 230 mm. Air spring: Float Evol. Stereo: 1.5 conical fully elliptical. Weight (approx): 2180 g. ITEM CODE 910-20-201

FOX 2025 29 FLOAT 36 F-S 160 GRIP X FACTORY BOOST LIMITED EDITION On the occasion of Fox's 50th anniversary, the forks are colored gold. . The Podium Gold makes a statement and shines in combination with the Kashima coating. Each model comes with a numbered authenticity certificate signed by Bob Fox, as well as a sheet of gold stickers matched to the current FOX dampers. Do you prefer something more discreet? No problem, the classic black or FOX's signature orange are still available. The new cartridge lineup ranges from the GRIP X2 (focused on maximum downhill performance) to the GRIP X (focused on trail performance without compromise) to the GRIP SL cartridge (focused on light cross-country performance). The robustness of the fusion remains, the floating axle in combination with the Kabolt X bolt axle. Another highlight is the venting of the immersion tube and the integrated channels in the immersion tubes to improve lubrication and drain compressed air in the fusion. The proven FLOAT EVOL technology guarantees a perfect response. 36 mm stiff stanchion, exclusive SKF seals and closed cartridge ensure long life. So nothing can hinder the fun riding on the trail. GRIP X DampingThis cartridge replaces the classic FIT4 and is the perfect companion for trail and all-mountain use. The goal was to reduce weight and simplify adjustments. It offers a finer response, greater suspension travel, and the ability to completely close the high-speed compression (HSC) phase, thus leading to a climb lock. There is also a low-speed compression adjustment (LSC), as well as a low-speed rebound (LSR). An internal floating piston (IFP) to absorb moved oil is now included in this cartridge. The result is a broader usage range and a strong focus on downhill performance. EVOLThe enlarged negative air chamber improves fork response. This increases comfort because the failure torque has been reduced. Additionally, a more linear spring characteristic curve offers better performance, especially in the mid-stroke ranges. FLOAT AIR SPRINGThe FLOAT air spring system reduces the failure torque and provides a highly sensitive fork with full comfort even on small bumps, for every rider and at different air pressures. Similar to FLOAT dampers, the FLOAT suspension system is characterized by a positive and a negative air chamber, which automatically balance when riding. Every rider thus benefits from the correct and precisely balanced air pressure in both chambers. The spring rate progression can be adjusted with our air volume shims – allowing every rider to set the air spring characteristics exactly. BLEEDERSThe bleed holes of the immersion tubes allow air pressure equalization with the press of a button. Pressure build-up in the immersion tubes drastically reduces fork performance and prevents full travel, while at the same time the fork's sensitivity and responsiveness suffer on small hits. LOWER LEG CHANNELSWhen a fork compresses, the air in the lower leg channels is also compressed. The more the fork compresses, the greater the pressure rise. This effect makes the fork respond more stiffly and may prevent using the full suspension travel. Overflow channels help solve this by directing compressed air from the bottom of the fork tubes upward, thus reducing the unintended pressure increase. An additional advantage of these channels is that the lubricating oil in the lower immersion tubes flows upward during the spring process and continuously lubricates the foam seals and the sliding bearings. AIR VOLUME SHIMSThe FLOAT air spring on FOX forks and dampers can be adjusted with volume shims to make the suspension elements more or less progressive. This allows the rider to adjust the suspension precisely to their needs. KASHIMA COATINGThe Genuine Kashima Coat coating for a smooth ride is exclusively available only from FOX, the Kashima Coat logo is applied to both stanchions. The distinctive Genuine Kashima Coat gold coating offers overall superior performance and guarantees minimal friction and optimal response with maximum durability. FLOTTING AXLEFloating axles are similar to conventional through-axle systems, but offer a significant performance advantage. The special bearing ensures perfect alignment of the fork and avoids unwanted friction caused by tension between stanchions and lower tubes. Floating axles ensure a much smoother suspension movement across the entire fork travel and greatly improve the response behavior. FOX 2025 29 FLOAT 36 F-S 160 GRIP X FACTORY BOOST LIMITED EDITION MAIN FEATURES: Usage scope: Trail, All Mountain Bike compatibility: no Wheel size: 29" Fork crown/stanchion material: aluminum/aluminum Fork crown diameter: 58 mm Stanchion material: aluminum, Kashima (gold coating) Stanchion diameter: 36 mm Lower tube material: aluminum Axle standard: Boost Kabolt-X through axle 15x110 mm Head tube: 1.5" to 1 1/8" tapered (transition from 40 mm to 28.6 mm at 80 mm +/-3 mm) Head tube length: approx. 245 mm Suspension travel: 160 mm Suspension system: Float Air, air Spring characteristic adjustment: yes, via volume shims Damping: GRIP X, closed cartridge Adjustment options: High-speed compression (HSC): 15 clicks | Low-speed compression (LSC): 16 clicks | Low-speed rebound (LSR): 17 clicks Lockout: on the fork crown Installation height: 571 mm Brake mounting: PM7, post mount (min. 180 mm brake rotor) Maximum permitted rotor size: 230 mm Maximum tire diameter: 762 mm Maximum tire width: 2.6" or min. 6.0 mm clearance between tire and fork crown Offset: 44 mm Color: glossy gold, black-gold stickers Manufacturer's stated weight: from 1929 g (29", F-S, 160, Grip X, Kabolt X, head tube length 165 mm) IN THE BOX 1x FOX 2025 29" Float 36 F-S 160 GRIP X Factory Boost Limited Edition Podium Gold Kabolt-X 15x110 mm tapered 58 HT 44 mm offset suspension fork 1x FOX 15x110 mm Kabolt-X Boost through axle 3x FOX air spacers 1x Claw Ahead 1x User manual 1x Sticker sheet (gold stickers for dampers) 1x Numbered authenticity certificate ARTICLE CODE 910-21-259

FORK FOX 34 PERFORMANCE FLOAT 27.5 150 MM 51 MM RAKE FOX 34 PERFORMANCE FLOAT fork 27.5 P-S, 150, Grip 3Pos, PMS-320C/PMS-320C, rake 51 mm. Tapered steerer tube 1''1 / 8-1,5 '', axle 15x110, air float spring. The GRIP cartridge draws inspiration from the motorcycle world, using sealed cartridge FIT technology combined with an independent floating spiral piston. GRIP allows excess oil to pass through specially designed openings at the top of the shock to maintain consistent damping and increase durability. The Performance series forks offer Open, Medium and Firm modes with additional micro-adjustments between the settings. The FLOAT air-sprung system is lighter and reduces the effort required to start pedaling. The Float system is equipped with positive and negative air springs that automatically equalize during use to give each rider the right pressure balance. The curve progression of the spring can be adjusted via volume spacers.

FOX 36 FLOAT FACTORY FORK 2023 29 FULL-SUSPENSION 150 GRIP2 HSC/LSC SBLK 15QRX110 R44 The FOX 36 FLOAT FACTORY 2023 29 GRIP2 HSC/LSC SBLK 15QRX110 R44 is the undisputed champion of all mountain, and for 2023 it has been equipped with a new spring. The new spring has an updated design and engineering for greater steer tube stiffness and longer life. The stiffness remains the same as in previous editions, but the weight has been reduced by 20 grams. The increase in air volume at the bottom of the legs reduces the amount of unintended additional pressure ramps. The oil circulating in the bottom of the leg also circulates in the top, continuously lubricating the foam rings and bushings as the fork compresses and extends during its travel.The lower foot bleed has been engineered to reduce every possible gram without compromising the stiffness and strength required by modern enduro and gravity riding. The Grip2 technology offers unparalleled ride quality and ultra-precise adjustment. It allows external adjustment of suspension performance thanks to the patented Variable Valve Control (VVC) technology.The Float Evol technology absorbs small bumps by increasing the negative air spring volume. The linear curve of the spring provides greater initial softness, more support at mid-stroke, and a more adjustable bottom-out progression. FORCELLA FOX 36 FLOAT FACTORY 2023 29 GRIP2 HSC/LSC SBLK 15QRX110 R44 MAIN FEATURES: Damper: GRIP2 with dual VVC (Variable Valve Control). Travel: 150 mm. Rake: 44 mm. Wheel size: 29". 15QR x 110 mm Boost. Steerer tube: 1.5 tapered. Top of leg finish: true Kashima coat. ARTICLE CODE 910-21-115

FORK FOX 38 FLOAT FACTORY KASHIMA FLOAT 29 FRONT 170 GRIP2 HSC/LSC ORNG KX110 The FORK FOX 38 FLOAT FACTORY KASHIMA FLOAT 29 FRONT 170 GRIP2 HSC/LSC ORNG KX110 is perfect for mounting on a 170 mm travel enduro MTB. It possesses the same revolutionary features as the 36 but redefines the characteristics of a long-travel single-crown fork and sets a new benchmark in terms of safety, performance, and durability. Floating axles offer a clear performance advantage due to their unique ability to align the exact wheel mounting surface width with the front hub flange spacing, thus creating perfect frame alignment and eliminating unwanted friction between the upper and lower stanchions. Floating axles ensure a much smoother suspension movement throughout the fork’s travel, greatly improving sensitivity and overall ride quality.The Fox 38 fork features a new patent-pending quick-release floating pin system, combining the benefits of a floating pin with the ease of quick release tools-free. With this system, the spacing is locked by a floating steerer tube, allowing repeated removal and reinstallation of the front wheel while maintaining perfect fork alignment. The floating axle positioning is factory pre-set, so if you’re unsure how to use the floating axle system or simply don’t want to deal with it, you can simply install the front wheel and continue riding.The Kabolt-X pin is a lightweight floating axle that reduces weight and increases torsional rigidity thanks to its single-arm pin design and no steerer. Frame alignment must be restored every time the front wheel is removed and reinstalled on both the Kabolt-X floating axle and the 40 axle, but the end result is the same: perfect alignment and flawless performance.When the fork compresses, the air volume inside the lower legs decreases, increasing air pressure. The more the fork compresses, the more the pressure increases. This effect can undesirably prevent reaching full travel. Bypass channels, located in the lower part of the fork, help relieve this problem by dramatically increasing the air volume inside, thus reducing the amount of unwanted pressure ramps.The oil for the lower legs is circulated to the top of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends during its travel.The lower leg bleed system allows you to equalize pressure with the simple push of a button. The pressure buildup in the lower feet drastically reduces fork performance, preventing full travel and decreasing sensitivity and responsiveness to small impacts.Our all-new lower leg design is engineered to shed every possible gram without compromising the stiffness and durability required by modern enduro and gravity bikes.The arch-shaped design of this fork is intended to pair perfectly with modern Enduro and Downhill bikes. The steering tube profiles have become larger and fork offsets shorter. The new arch shape accounts for this need, protruding forward to provide ample space for the steering tube at maximum compression.The Grip2 damper is the benchmark for ride quality and ultra-precise adjustment. It includes Variable Valve Control (VVC) technology, which allows fine external adjustment of suspension performance. GRIP2 enables you to achieve, with a simple twist of a knob, what would normally require the long and complicated task of fully disassembling and reassembling the fork.EVOL technology increases the negative air spring volume, optimizing small bump sensitivity. The EVOL air spring’s linear curve provides smoother initial travel, greater mid-stroke support, and a more adjustable end progression. The advantages of this technology are further enhanced by the new channels for the rear legs and bleed ports that reduce trapped air pressure in the lower legs, allowing the EVOL air spring to operate freely without unwanted interference.Factory series products feature an original Kashima coating that is ultra-durable and slick. FORK FOX 38 FLOAT FACTORY KASHIMA FLOAT 29 FRONT 170 GRIP2 HSC/LSC ORNG KX110 MAIN FEATURES: Wheel size: 29". Travel: 170 mm. Rake: 44, Axle: 15QR x 110. Upper tube finish: Kashima Coat. Air channels. Bleed. Floating axle. Disc brake size: 180 mm direct mount compatible up to 230 mm. Optional mudguard mounting for FOX 36/38 with solid 4-point direct mount. FLOAT EVOL air spring. Conical steerer 1.5. GRIP2 ADJUSTMENT High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. ARTICLE CODE 60X91021107

FOX FLOAT 36 29 FRONT FORK BICYCLE 160 GRIP2 HSC/LSC SBLK 15QRX110 R44 2023 The FOX FLOAT 36 29 F-S 160 GRIP2 HSC/LSC SBLK 15QRX110 R44 2023 fork allows handling all trails and is equipped with high- and low-speed return adjusters, improved compression damping, and reduced friction for unmatched performance and adjustability. FOX FLOAT 36 29 F-S 160 GRIP2 HSC/LSC SBLK 15QRX110 R44 2023 MAIN FEATURES: The updated crown design saves up to 20 grams and provides significant structural improvements. Kashima coating on upper tubes. Low-friction seals for better performance. Floating axles for perfect alignment. Shock absorber: GRIP2. Travel: 160 mm. Offset: 44 mm. Wheel size: 29". Axle: 15x110mm Boost. Steerer: 1.5 tapered. Maximum rotor diameter: 230mm. Minimum rotor diameter: 180mm. ARTICLE CODE 60X91021111

FOX SHOX PODIUM FACTORY 29 GRIP X2 58HT 44MM OFFSET 170MM AIR SPRING The Fox Shox Podium Factory 29'' is a upside-down fork designed for downhill, aimed at enduro racing, e-mtb and downhill. It combines the feel and geometry of a single-plate fork with the stiffness and fluidity of a double-plate. The Podium represents a new benchmark in single-plate fork performance. Thanks to exceptional torsional rigidity, ultra-smooth travel, and the safety of a DH fork, it offers a competitive edge never seen before, for both enduro athletes and everyday riders. Regarding hydraulics, the Fox Podium benefits from Grip X2, the most adjustable, soft, and smooth downhill cartridge ever created by Fox, while the 20 mm Boost through-axle provides greater torsional stiffness. FOX SHOX PODIUM FACTORY 29 GRIP X2 58HT 44MM OFFSET 170MM ESC MAIN FEATURES: Construction: upside-down monospring Wheel diameter: 29" Crostiera diameter: 58mm Travel: 170mm Hydraulics: GRIP X2 (HSC - LSC - HSR - LSR) Axle: 20 x 110mm Boost Offset 44mm Head tube: 1.5 Tapered Disc diameter: 200mm Post mount, 230mm max Elastomer component: FLOAT chambers with FloatCore piston Adjustments: preload, high- and low-speed rebound, high- and low-speed extension Stanchions: 47 mm Compatible with e-bikes Indicated weight by manufacturer approx.: 2695g IN THE BOX Star nut Carbon fiber fork leg protectors Alternative brake hose guide clamp 6 volume spacers Manual FOX sticker

OHLINS AM RFX34 M2 AIR OTX18 29 44-130 FORK Medium travel fork perfect for trail riding and downcountry, and for tackling even the most demanding trails with total ease. The fork can be easily adjusted: 15 low-speed compression and rebound adjustment clicks. Three high-speed compression adjustments. Optimal balance between traction, weight control (1698 g), and stiffness (also compatible with e-bikes). The new fork replaces the original RXF34 and offers a 130 mm travel optimized for lightweight 29er trail bikes. Weighing only 1698 g, the fork features a brand-new air spring and shock absorber, tailored to the needs of the emerging riding style, while retaining all the hallmarks of high-performance, race-proven Öhlins suspensions, such as its longer-travel and single-chainring RXF36 m.2 and RXF38 m.2 cousins. The OTX18 shock is specifically designed for downcountry and stems from the great success of the TTX18 found in Öhlins downhill and trail forks. It shares several key components with its bigger brother TTX18 but weighs 27% less and is optimized for faster, smoother trail riding, finding an optimal balance between traction, control, weight, and stiffness. Like all Öhlins shocks, the OTX18 offers impressive adjustment for tuning, with fifteen low-speed compression and rebound adjustment clicks and three high-speed compression adjustments. The new shock is paired with a robust, lightweight air spring, equipped with a positive chamber and a self-adjusting negative chamber. The positive chamber allows you to adjust the spring curve to your needs using the Öhlins volumetric spacers system. The negative chamber, instead, is designed for fast trail riding and provides a initial soft feel and superb sensitivity to small bumps. The surface and seals of the spring also minimize friction and detent force to enhance the fork’s smoothness. The fork’s chassis is very rigid and offers precise steering, and all this was made possible thanks to a closed outer tube design to increase rigidity, impact resistance, and the volume of the lower leg. Increasing the air volume in the lower part of the fork enhances the air spring’s impact on overall performance. The RXF34 m.2 also benefits from the same floating axle design proven in competition present in the RXF36 m.2 and RXF38 m.2, which reduces friction and further increases rigidity. FORCELLA OHLINS AM RFX34 M2 AIR OTX18 29 44-130 KEY FEATURES: OTX18 shock optimized for trail. 34 mm stanchions. 29-inch wheels. 44 mm offset. 130 mm travel. Floating axle design to minimize friction. Approved for eMTB. Brake rotor sizes: 160 mm, max 203 mm. Maximum tire size: 29 x 2.6. Weight 1698 g without spacers. AXLE TO CROWN 541 mm @ 130 mm travel. ARTICLE CODE FGMTB 3413 2230

OHLINS AM RXF38 M2 AIR TTX18 29 44/170 FORK The proven TTX 18 fork shock for the DH38 Race fork has been revised to offer even more traction and control on Enduro trails. The TTX 18 cartridge kit includes an 18 mm piston optimized for trail to improve sensitivity to small bumps. The adjustment system is specific for Trail and Enduro competition and provides 15 steps for low-speed compression and low-speed rebound. For high-speed compression there are 3 additional steps plus a climb-mode setting. Three-chamber air spring system with a double piston, allowing full adjustment of the air springs from initial movement to bottom-out. The fork can accommodate tires 29x2.8. OHLINS AM RXF38 M2 AIR TTX18 29 44/170 FORK MAIN FEATURES: TTX technology. Travel: 170 mm. Stanchion diameter: 38 mm. Offset: 44 mm. Compatible with tires 29x2.8. Race-tested adjustment system. General improvements to reduce friction. PART NUMBER FGMTB 3817 2210