Orbea

ORBEA KERAM 19 34.9MM SEATPOST CLAMP The 34.9mm Keram 19 seatpost clamp brings with it the precision and reliability required for Keram 2019 frames, offering a perfect solution to keep the seatpost firmly in place during your cycling adventures. ORBEA KERAM 19 34.9MM SEATPOST CLAMP main features: Clamp designed specifically for Keram 2019 frames. 34.9mm diameter for perfect adaptability to the seatpost. COMPATIBLE WITH: KERAM 2019-2023 Alloy-HYDRO-27 KERAM 2019-2023 KERAM 2019-2023 Alloy-HYDRO-29 KERAM 2019-2023 KERAM 2019-2021 Alloy-HYDRO-28 KERAM 2019-2021 KERAM 2019-2020 Alloy-HYDRO-28

The SIC SPB HS02-05 REG STK+GROMMETS Collector from Orbea is the component designed for those who want a clean, silent, and fully integrated cable routing on their frame with HS02 headset. Designed for Regular Stack configurations, it works in combination with the HS02-15 headset cover and the HS02-03/04 spacers, allowing cables to be routed inside the headset in an orderly and secure way. Thanks to the different included SIC grommets, you can adapt the collector to any combination of cables and housings: brakes, mechanical or electronic shifting, dropper post. The result is an essential cockpit, with fewer exposed cables, greater protection from dirt and water, and easier maintenance, following the technical instructions of the specific Orbea Bluepaper for your bike. Main features of ORBEA HS02 REGULAR STACK CABLE COLLECTOR: SIC HS02-05 cable collector specifically for HS02 internal headset routing Compatible with Regular Stack configurations (to be used with HS02-15 headset cover and HS02-03/04 spacers) Includes complete set of SIC grommets for any combination of cabling through the headset SIC Grommet L0 HS02-49: without holes, for cableless configurations SIC Grommet L1 HS02-42: 4 mm + 4 mm blind, ideal for brake/shift housings with a closed seat SIC Grommet L2 HS02-43: 4 mm + 4 mm, for double housing (e.g., brake + shift) SIC Grommet L3 HS02-44: 4 mm + 4 mm + 3 mm, for three lines (e.g., brake, shift, dropper post) SIC Grommet R1 HS02-45: 5 mm, designed for larger diameter hydraulic brake hose SIC Grommet R2 HS02-46: 4 mm + 5 mm, housing + brake hose combination SIC Grommet R2e HS02-47: 3 mm + 5 mm, ideal for electronic cable + brake hose SIC Grommet R3 HS02-48: 4 mm + 3 mm + 3 mm, for configurations with multiple small diameter cables Ensures a clean, silent cable routing protected from dirt and infiltration Compatibility and assembly must always be verified in the Orbea technical Bluepaper for the specific bike model COMPATIBILITY: Compatible with Regular Stack assemblies (used with HS02-15 cover and HS02-03/04 spacers) ACCESSORIES INCLUDED: Includes SIC grommets for various cabling combinations (L0, L1, L2, L3, R1, R2, R2e, R3)

The Orbea Apollo Orbit 70mm front mudguard is designed to offer effective protection from mud and water during daily use and e-bike rides. Designed for perfect integration with Orbea Kemen Adventure bikes, it guarantees extensive coverage of the front wheel, keeping the bike cleaner and more protected even in adverse weather conditions. Dedicated Orbea Kemen Adventure compatibility 70mm width for optimal protection Integrated and clean design Ideal for urban and trekking use Note: kit supplied without mounting hardware and additional accessories.

The Apollo Orbit 70mm Spoiler Mudguard by Orbea is the detail that makes the difference when the terrain becomes wet and muddy. Designed to work in perfect synergy with the front mudguard and the Apollo Orbit rear mudguard, it adds that extra protection that allows you to keep pedaling focused on the trajectory, not on the splashing mud. Ideal for those who use the bike daily or face challenging trails, this spoiler integrates cleanly with the bike’s lines, maintaining a refined aesthetic and impeccable functionality. Before installation, it is important to consult your Orbea bike's Bluepaper technical manual to follow the specific instructions step by step and achieve a safe and precise installation. Main features of the Apollo Orbit 70mm Spoiler Mudguard: Specific spoiler for front and rear Apollo Orbit mudguards 70 mm width for effective protection against water and mud Dedicated compatibility with Orbea models indicated in the Bluepaper technical manual Integrated design that follows the bike’s lines without burdening its aesthetic Installation guided by instructions in the bike’s Bluepaper technical manual Ideal for daily use, commuting and off-road outings in wet conditions

The Orbea Rear Mudguard Kemen SUV Apollo 70mm. Complete Set is the ideal complement to transform your Kemen SUV into a bike ready for anything, even on the rainiest days. Specifically designed to integrate with the frame lines and the dedicated rear luggage rack, it offers effective protection from splashes, mud, and water, keeping you and your equipment cleaner and drier. Thanks to the 70 mm Curana design, this mudguard fits perfectly with the generous tires of the Kemen SUV without compromising space or functionality. It is a complete set designed for a clean and solid mounting, ideal for those who use the bike daily in the city, for commuting, or for outdoor adventures. Following the technical instructions of the Kemen Bluepaper, the installation is precise and secure, guaranteeing a professional result and perfect aesthetic integration with your Orbea. Rear Mudguard Kemen SUV Apollo 70mm. Complete Set main features: Complete set of 70 mm Apollo Curana rear mudguard specific for Orbea Kemen SUV Designed to be mounted exclusively together with the Kemen SUV rear luggage rack 70 mm width ideal for wide tires, with effective coverage against water and mud Requires drilling a hole for the bolt to fix to the adapter bridge of the rear rack seatstays Hole position to be checked according to the frame size using the Kemen Bluepaper technical manual Clean aesthetic integration with the frame and luggage rack, intended for urban and trekking use Durable and robust materials, suitable for daily use in all weather conditions MUDGUARD MODEL: Curana Apollo 70mm MOUNTING COMPATIBILITY: Only for mounting with Kemen SUV rear luggage rack MOUNTING INSTRUCTIONS: It is necessary to drill the mudguard for fixing to the upper bridge of the frame.

The Orbea Front Axle 12x119(2P1.0x13) Hollow front thru-axle is designed for those seeking a secure, precise, and lightweight wheel attachment on road bikes with 12x100 standard. Thanks to the hollow design and the thread compatible with the Speed Release system, it allows quick wheel changes while always maintaining perfect hub alignment in the fork. Ideal as an original spare or a reliable upgrade, it is the perfect solution for those who want to maintain maximum performance and safety, both in daily training and in more demanding rides. ORBEA FRONT HOLLOW THRU-AXLE 12X119 main features: 12 mm hollow front thru-axle specific for 12x100 road frames Compatible with Speed Release system for faster wheel changes Axle diameter: 12 mm for maximum stiffness and riding precision Axle length: 119 mm, ideal for modern road forks Thread pitch: 2P1.0 for compatibility with Orbea frames and other frames with the same standard Thread length: 13 mm for secure and stable tightening Hollow design to reduce weight without compromising strength Original Orbea spare part, perfect for replacement or upgrade AXLE DIAMETER: 12 mm AXLE LENGTH: 119 mm THREAD PITCH: 2P1.0 THREAD LENGTH: 13 mm RELEASE TYPE: Speed Release FRAME COMPATIBILITY: For 12x100 mm road frames MAIN FEATURE: Hollow front thru-axle

The Orbea Rear Axle 12x165(2p1.0x15) Lite thru-axle is designed for those who want reliability and practicality on road frames with 12x142 standard. Lightweight but robust, it uses the Speed Release system to make wheel mounting and dismounting faster and easier, ideal for both daily use and more demanding rides. Precise machining and optimized measurements ensure a secure tightening, improving stiffness and riding precision of your Orbea frame (and all frames compatible with these specs). ORBEA REAR AXLE 12X165 LITE SPEED RELEASE main features: 12 mm rear Lite thru-axle specific for 12x142 road frames Compatible with Speed Release system for quick and intuitive wheel changes Axle diameter: 12 mm for greater stiffness and riding precision Axle length: 165 mm, optimized for modern road frames Thread pitch: 2P1.0 for maximum compatibility with dedicated Orbea frames Thread length: 15 mm for secure and stable tightening Lightweight construction, ideal for racing and endurance bikes Perfect solution as original replacement or upgrade for compatible frames AXLE DIAMETER: 12 mm AXLE LENGTH: 165 mm THREAD PITCH: 2P1.0 THREAD LENGTH: 15 mm RELEASE TYPE: Speed Release FRAME COMPATIBILITY: For 12x142 mm road frames

The Orbea Rear Axle 12x186(1.0x15) Hollow is designed to ensure precise and secure fastening of the rear wheel on Boost 12x148 mm frames. Thanks to its hollow construction, it offers an excellent compromise between strength and lightness, ideal for those seeking reliable performance on trail, all-mountain, and everyday use. Designed to perfectly integrate with Orbea frames, it ensures correct wheel alignment and increased frame stiffness, improving riding precision and downhill stability. To achieve the best in terms of safety and durability, it is important to follow the assembly instructions in your bike's Bluepaper technical manual or rely on an authorized dealer. Rear Axle 12x186(1.0x15) Hollow main features: Hollow rear thru-axle specific for Boost 12x148 mm frames Axle diameter: 12 mm for maximum rigidity and safety Axle length: 186 mm, compatible with dedicated Orbea frames Thread pitch: 1.0 mm for precise tightening Thread length: 15 mm for secure engagement in the frame Hollow design to reduce weight without compromising strength Optimal compatibility with frames indicated in the Orbea Bluepaper technical manual Installation by an authorized dealer is recommended to ensure safety and proper assembly

ORBEA OIZ CARBON MAIN PIVOT HARDWARE KIT MAIN PIN The hardware kit for the main rotation point of the rocker of the Oiz Carbon frame is essential to ensure maximum efficiency and durability for your bike. Made specifically for Oiz carbon frames, this kit is designed to deliver optimal performance with every pedal stroke, allowing you to tackle any terrain with confidence and control. (Compatible models: see list). Note that bearings non are included in the kit. KEY FEATURES OF PERNO PRINCIPALE ORBEA OIZ CARBON MAIN PIVOT HARDWARE KIT: Hardware kit for the main rotation point for Oiz carbon frames Designed to ensure maximum efficiency and durability Bearings non included in the kit

The Trainer Axle 12x183x2P.1x35+t Orbea is the rear thru-axle designed for those who use the trainer but do not want to sacrifice mounting precision and the safety of their frame. Designed for road frames with 12x142 standard and Speed Release threading, it replaces the original bike axle ensuring a perfect fit with the trainer and optimal rigidity. Ideal for those who train indoors regularly, this axle ensures compatibility, reliability, and easy installation following Orbea's technical instructions, so you can focus solely on the quality of your training sessions. ORBEA TRAINER THRU-AXLE 12X183 2P1.0 main features: Rear thru-axle for use with training rollers Compatible with 12x142 mm road frames with Speed Release threading Axle diameter: 12 mm Axle length: 183 mm Thread pitch: 2P1.0 Thread length: 35 mm Includes t-type axle Not compatible with Tacx Vortex Smart trainer Compatibility to be verified through barcode or Orbea model Blue Paper Assembly instructions available in technical manuals and the support section of Orbea's website AXLE DIAMETER: 12 mm AXLE LENGTH: 183 mm THREAD PITCH: 2P1.0 THREAD LENGTH: 35 mm FRAME COMPATIBILITY: Compatible with 12x142mm road frames, Speed Release COMPATIBLE WITH TACX VORTEX SMART: NO INCLUDED ACCESSORIES: Includes nut/cap

The Orbea Wild 2023 Bosch Powermore Battery Adapter Plate is the specifically designed mounting plate to neatly and safely integrate the Bosch PowerMore 250 external battery on Wild model 2023 frames. If you want to increase the autonomy of your e-MTB without sacrificing the aesthetics and sturdiness of the original mounting, this adapter is the component specially designed for your frame. Designed to follow the geometry and standards of Orbea, it ensures precise, stable fastening compatible with the Bosch system, allowing you to face longer rides and greater elevation gains with maximum peace of mind. To choose the correct component for your bike, it is always recommended to verify the code via barcode or consult the Blue Paper technical manual of your model, so you can be sure to mount the right spare part with the correct installation instructions. Wild 2023 Bosch Powermore Battery Adapter Plate main features: Specific mounting plate for Orbea Wild MY2023 frames Compatible with Bosch PowerMore 250 external battery Designed for a clean and secure integration on the frame Requires Bosch PowerMore 250 support/bracket (not included) Ideal solution to increase your Wild e-MTB autonomy Compatibility verifiable through bike barcode or article code Complete technical references in the Orbea Wild model Blue Paper Assembly instructions available in the technical manuals and Orbea support section