ORBEA

The Yes Machine Welcome to a world beyond power. A world where going far and fast is a given. Whatever the trail sfida, the answer is always “yes”. Orbea Wild is a bike built without compromises. Light and fully optimized, it comes out of our factory ready for action, with the latest Bosch motor and top-level race-ready setups. Light in weight, powerful in performance Designed to deliver high performance, the Wild combines optimized weight distribution, 170 mm of travel and gravity-oriented geometry. The Wild tames the wildest trails but always remains viva, responsive and engaging — far from the dull, isolated feeling of many e-bikes. This balance between lightness and rigidity is the base of the Wild’s incredible handling. Advanced construction, high-performance materials Whatever material you choose, you can be sure we have made no compromises: every Wild is built with the utmost care and with superior construction techniques. Optimized rigidity for e-bikes An e-bike must be about 10% more rigid than an equivalent muscle bike to offer similar performance. To achieve this without adding unnecessary weight, an uncompromising frame design is required. The reinforced frame allows increased rigidity in the bottom bracket area, while our SBS (Secure Battery System) reduces complexity and superfluous elements. Light, lighter, lightest The best materials, the smartest designs and key technologies such as the SBS design make the Wild one of the lightest full-power e-bikes in the world. All else being equal, a lighter bike means superior performance, greater range and better handling. Infinite power and unlimited range Fully powered and ready for tutto, the Wild is designed for maximum fun on the steepest climbs and the most demanding descents. The combination of the latest-generation Bosch motors and advanced batteries delivers power, control and extraordinary range. Performance through simplicity “Performance through simplicity” means eliminating everything superfluous and keeping only what directly improves the riding experience. Sealed internal cables Shorter cables, fewer vibrations and more direct routing ensure better performance and simplified maintenance. ORBEA WILD M10 750WH BIKE MAIN FEATURES: - Wheel Diameter: 29 - Gears: 12 - Motor: Bosch - Battery (Wh): 750 - Travel (mm): 170 THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS - Frame: Orbea Wild OMR 2025, 29" wheels, Concentric Boost 12x148 - Motor: Bosch Performance Line CX BDU3843 - Display: Bosch System Module Kiox 400C - Battery: Bosch Powertube 750Wh Horizontal BBP3770 - Charger: N/A - Fork: Fox 38 Float Performance 170 Grip 3-Pos QR15x110 - Shock: Fox Float X Performance Trunnion 2-Pos Evol LV custom tune 205x65mm - Rear derailleur: Shimano XT M8100 SGS Shadow Plus - Front derailleur: N/A - Shift lever: Shimano SLX M7100 I-Spec EV - Cassette: Shimano CS-M7100 10-51T 12-speed - Chain: Shimano M6100 - Chainring: e*thirteen Helix Core - Crankset: N/A - Front brake: Shimano XT M8220 hydraulic disc - Rear brake: Shimano XT M8220 hydraulic disc - Brake rotors: N/A - Front tire: Maxxis Minion 2.40" 120 TPI 3CT/DD/TR MaxxTerra - Rear tire: Maxxis Minion 2.40" 120 TPI 3CT/DD/TR MaxxTerra - Rims: DT Swiss H-1900 Spline 30c TLR 15/110mm 6-Bolt - Front hub: N/A - Rear hub: N/A - Handlebar: OC Mountain Control MC20 Alu SL, Rise 20, width 800 mm - Stem: OC Mountain Control MC20, angle 0° - Saddle: Fizik Aidon 208x145 mm with manganese rails - Seatpost: OC Mountain Control MC22, 31.6 mm, dropper - Maximum permitted weight: N/A - Weight: N/A *PRO-M STORE OFFERS A FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DRIVETRAIN AND BRAKES ARE ALREADY INSTALLED

The Orbea WILD M10 Mullet combines the stability of the 29" front wheel with the agility of the 27.5" rear wheel, ideal for tackling every technical trail and the most challenging descents with precision. Built with a lightweight and durable Orbea Wild OMR 2025 carbon frame, this e-bike offers 170mm of travel thanks to a Fox 38 Float Performance fork and custom Fox Float X Performance Trunnion shock. The Bosch Performance Line CX 2026 motor delivers a maximum torque of 100 Nm and a peak power of 750 W, supported by an integrated 750 Wh Bosch Powertube battery that guarantees autonomy for longer rides. Safety and control are enhanced by the new Shimano XT M8220 brakes, which ensure powerful, modulable stopping power on any terrain. The Shimano XT M8100 rear derailleur and Shimano SLX M7100 I-Spec EV shifters offer precise and reliable shifting. The updated Bosch Kiox 400C display provides essential data such as speed, remaining range, assistance level and navigation, offering a clear and intuitive interface for a driving experience that is always under control. Race Face AR 30c tubeless ready wheels and Maxxis Minion 2.40" tires complete this e-bike, ensuring grip and high performance on any trail. A high-end mullet e-bike, perfect for enduro and technical trail enthusiasts who want the best in power, control and technology. ORBEA WILD M10 MX BIKE KEY FEATURES: Wheel Diameter: 29/27.5 Gearbox Speed: 12 Engine: Bosch Battery (Wh): 750 Travel (mm): 170 TECHNICAL SPECIFICATIONS Frame: Orbea Wild OMR 2025, Mullet wheels, Concentric Boost 12x148 Engine: Bosch Performance Line CX BDU3843 Display: Bosch System Module Kiox 400C Battery: Bosch Powertube 750Wh Horizontal BBP3770 Charger: N/A Fork: Fox 38 Float Performance 170 Grip 3-Pos QR15x110 Shock: Fox Float X Performance Trunnion 2-Pos Evol LV custom tune 205x65mm Gear: Shimano XT M8100 SGS Shadow Plus Derailleur: N/A Shifter: Shimano SLX M7100 I-Spec EV Cassette: Shimano CS-M7100 10-51t 12-Speed Chain: Shimano M6100 Crown: e*thirteen Helix Core Cranks: N/A Front brake: Shimano XT M8220 Hydraulic Disc Rear brake: Shimano XT M8220 Hydraulic Disc Discs: N/A Front tire: Maxxis Assegai 2.50" 60TPI 3CG/EXO+/TR MaxxGrip Rear tire: Maxxis Assegai 2.50" 60TPI 3CG/EXO+/TR MaxxGrip Rims: Oquo Mountain Control MC32TEAM POWER Front Hub: N/A Rear Hub: N/A Handlebar: OC Mountain Control MC20 Alu SL, Rise 20, width 800 mm Stem: OC Mountain Control MC20, 0° Saddle: Fizik Aidon 208x145 mm, manganese rail Seatpost: OC Mountain Control MC22, 31.6 mm, telescopic Maximum weight allowed: N/A Weight: N/A

Designed to offer superior performance in the world of electric enduro, this long-travel e-bike with Orbea Wild OMR 2025 carbon frame combines lightness, stiffness and strength, ensuring agility and control on all types of terrain. The powerful updated 2026 Bosch Performance Line CX motor delivers 100 Nm of torque and reaches up to 750W peak, providing smooth and powerful assistance to tackle even the most demanding climbs. The 750Wh Bosch Powertube battery, integrated into the frame, ensures excellent range for long off-road rides. The 170 mm travel is managed by a RockShox ZEB Base-A2 DebonAir+ fork and a Fox Float X Performance shock, top-of-the-range components to absorb impacts and keep the bike stable and safe on descents. The carbon frame, lighter than the aluminum version, offers a more responsive riding feel without sacrificing robustness. The 12-speed Shimano SLX M7100 drivetrain is precise and reliable, while the Shimano MT420 brakes provide power and modulation. The Race Face AR 30c tubeless ready wheels are fitted with Maxxis Minion 2.40” tires for exceptional traction and grip. This Orbea Wild M20 e-MTB is perfect for those seeking a balance between low weight, power and high-quality components, ideal for tackling technical trails and long mountain tours with maximum performance. ORBEA WILD M20 BIKE KEY FEATURES: Wheel Diameter: 29 Gears: 12 Motor: Bosch Battery (Wh): 750 THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame: Orbea Wild OMR 2025, 29" wheels, Concentric Boost 12x148 Motor: Bosch Performance Line CX BDU3843 Display: Bosch System Controller BRC3100 Battery: Bosch Powertube 750Wh Horizontal BBP3770 Charger: N/A Fork: RockShox ZEB Base-A2 DebonAir+ 170 E-MTB Shock: Fox Float X Performance Trunnion 2-Pos Evol LV custom tune 205x65mm Rear derailleur: Shimano SLX M7100 SGS Shadow Plus Front derailleur: N/A Shifter: Shimano Deore M6100 I-Spec EV Cassette: Shimano CS-M7100 10-51t 12-Speed Chain: Shimano M6100 Chainring: e*thirteen Helix Core Crankset: N/A Front brake: Shimano MT420 Hydraulic Disc Rear brake: Shimano MT420 Hydraulic Disc Rotors: N/A Front tire: Maxxis Minion 2.40" 120 TPI 3CT/DD/TR MaxxTerra Rear tire: Maxxis Minion 2.40" 120 TPI 3CT/DD/TR MaxxTerra Rims: Race Face AR 30c Tubeless Ready Front hub: N/A Rear hub: N/A Handlebar: OC Mountain Control MC30, Rise 20, Width 800 Stem: OC Mountain Control MC20, 0º Saddle: Fizik Aidon 208x145mm manganese rail Seatpost: OC Mountain Control MC22, 31.6mm, Dropper Maximum permitted weight: N/A Weight: N/A *PRO-M STORE OFFERS A FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DRIVETRAIN AND BRAKES ARE ALREADY INSTALLED

The Orbea Wild ST H20 is an electric mountain bike designed to offer an exceptional experience on the trails, combining power, agility and high-quality components to conquer any route. The Orbea Wild ST H20 is the perfect companion for trail enthusiasts, offering a winning combination of power, performance and reliability to help you get the most out of every ride. ORBEA WILD ST H20 BIKE MAIN FEATURES: Bosch Performance Line CX motor: delivers 100 Nm of power for smooth assistance and precise control on challenging terrain. Bosch Powertube 750 Wh battery: offers great range for long routes, with the possibility of extension. 150 mm suspension: Fox 36 Float AWL fork and rear shock for optimal performance on descents and rough terrain. Shimano SLX M7100 drivetrain: 12 speeds for precise and reliable gear changes. Shimano M6120 brakes: powerful hydraulic disc brakes for safe braking in all conditions. Maxxis Dissector 2.40 wheels: high-performance tires for superior grip and control. Hydro aluminum frame: light and resistant, designed to ensure durability and performance on the trails. Ideal for mountain bike enthusiasts looking for a versatile and high-performance e-MTB. Allows you to tackle technical descents and demanding climbs with greater ease and fun. Offers an agile and safe riding experience thanks to its geometry and components. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame: Orbea Wild Hydro, 29" wheels, Concentric Boost 12x148 Motor: Bosch Performance Line CX BDU3843 Display: Bosch System Controller BRC3100 Battery: Bosch Powertube 750Wh Horizontal BBP3770 Charger: Non available Fork: Fox 36 Float AWL HD Sport 150 Rail 2.0 QR15x110 Shock absorber: Fox Float Performance Trunion 2-Pos Evol LV custom tune 205x57.5mm Rear derailleur: Shimano SLX M7100 SGS Shadow Plus Front derailleur: Non available Shifter: Shimano Deore M6100 I-Spec EV Cassette: Shimano CS-M7100 10-51t 12-Speed Chain: Shimano M6100 Chainring: e*thirteen Helix Core Crankset: Non available Front brake: Shimano M6120 Hydraulic Disc Rear brake: Shimano M6120 Hydraulic Disc Rotors: Non available Front tire: maxxis Minion DHF 2.50" FB 60 TPI 3C MaxxTerra Exo TR Rear tire: maxxis Minion DHF 2.50" FB 60 TPI 3C MaxxTerra Exo TR Rims: Race Face AR 30c Tubeless Ready Front hub: Non available Rear hub: Non available Handlebar: OC Mountain Control MC30, Rise 20, Width 800 Stem: OC Mountain Control MC20, 0° Saddle: selle royal Vivo Sport Men 145 x 269mm Seatpost: OC Mountain Control MC22, 31.6mm, Dropper Maximum permitted weight: Non available *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY MOUNTED

THE YES MACHINE Wild is a bike built without compromises. Light and completely optimized, it leaves our factory ready for action with the latest Bosch motor and race-ready setups. With 150 mm of front and rear travel and angles designed to go fast, you know that whatever the challenge, Wild is ready to perform. MODULAR BATTERY SYSTEM Wild comes as standard with a 600Wh battery. This lighter battery offers maximum control while riding. For those who want longer routes, the 750Wh battery and the 250Wh range extender are available through MyO. BOSCH CX PERFORMANCE MOTOR The 100 Nm Bosch motor needs no introduction, with infinite power and controlled response. The updated motor offers more precise control, is quieter and lighter, and reduces pedaling resistance. TRAVEL OPTIMIZED FOR 150MM TRAILS Wild ST offers 150 mm of front and rear travel. FULL 29" WHEELS To maximize stability and control, Wild ST is available with 29" wheels. HIGH-POLISH ALUMINUM Including all the exceptional features of Wild on an aluminum frame was complex, but we never compromise on the quality of our aluminum frames. ORBEA WILD ST H30 BIKE MAIN FEATURES: Wheel Diameter: 29 Gears: 12 Motor: Bosch Battery (Wh): 600 Travel (mm): 150 TECHNICAL SPECIFICATIONS Frame: Orbea Wild Hydro, 29" wheels, Concentric Boost 12x148 Motor: Bosch Performance Line CX BDU3843 Display: Bosch System Controller BRC3100 Battery: Bosch Powertube 600Wh Horizontal BBP3860 Alternative Battery: Bosch Powertube 750Wh Horizontal BBP3770 + €250 Charger: N/A Fork: RockShox Psylo Silver RC 15x110 Boost Shock: Fox Float Performance Trunion 2-Pos Evol LV custom tune 205x57.5mm Rear derailleur: Shimano Deore M6100 SGS Shadow Plus Front derailleur: N/A Shifter: Shimano Deore M6100 I-Spec EV Cassette: Shimano CS-M6100 10-51t 12 speed Chain: Shimano M6100 Chainring: Prowheel EB17 alloy Crankset: N/A Front brake: Shimano MT420 hydraulic disc Rear brake: Shimano MT420 hydraulic disc Rotors: N/A Front tire: N/A Rear tire: N/A Rims: Alloy, Tubeless, 29", 29c, 32 holes Front hub: N/A Rear hub: N/A Handlebar: OC Mountain Control MC30, Rise 20, width 800 Stem: OC Mountain Control MC20, 0º Saddle: Selle Royal Vivo Sport Men 145 x 269 mm Seatpost: OC Mountain Control MC22, 31.6 mm, Dropper Maximum permitted weight: N/A Weight: N/A

The Orbea Seatpost Clamp 37 Oiz Carbon is the small component that makes a big difference on your Oiz carbon frame. Specifically designed to ensure the correct tightening of the seatpost, it guarantees stability, quietness, and a perfect aesthetic integration with the clean lines of the frame. Whether you are upgrading your bike, replacing a worn component, or completing a new build, this 37 mm collar is the right choice to maintain the original Orbea performance and reliability. ORBEA SEATPOST CLAMP 37MM OIZ CARBON main features: 37 mm seatpost collar specific for Orbea Oiz carbon frames Dedicated compatibility to ensure correct tightening without damaging the frame Design made to perfectly integrate with the lines of the Oiz frame Ideal solution as an original replacement or to complete a new assembly Ensures seatpost stability and reduces creaks and micro-movements

The Orbea Collector SIC No Spinblock HS02-06 is the solution designed for those who want to take advantage of the internal cable routing of the HS02 system while maintaining the freedom to use standard non-OC handlebar stems. This universal headset collector for internal cabling steering series allows the installation of traditional round spacers, offering greater flexibility in cockpit choice without sacrificing clean and orderly cable routing. It is important to know that by using this universal collector and a standard stem, the Spinblock steering limitation function present on some original Orbea assemblies is lost: the bike gains customization but requires careful and aware assembly. For this reason, Orbea recommends always checking the compatibility of the chosen handlebar stem, ensuring that all components are correctly assembled and that cables enter the headset collector without interference. The kit includes a complete range of SIC grommets to handle virtually every cable routing combination through the headset, adapting to the different brake, derailleur, and control configurations on your bike. Before assembly, it is essential to consult your bicycle’s Bluepaper technical manual to follow the official assembly instructions. ORBEA COLLECTOR SIC HS02-06 STANDARD STEM main features: Universal SIC HS02-06 collector for steering series with HS02 internal cabling Allows use of standard non-OC handlebar stems compatible with round spacers Enables internal cable routing maintaining a clean and tidy cockpit aesthetic Using universal collector and standard stems removes the Spinblock steering limitation function Orbea does not guarantee compatibility of stems not originally assembled by the manufacturer Requires careful check that the standard stem allows correct assembly of all components Ensure cables enter the headset collector correctly without bends or interference Includes SIC grommets for every cable routing combination through the headset SIC Grommet L0 HS02-49: no holes, for configurations without cable routing SIC Grommet L1 HS02-42: 4 mm + 4 mm blind, for partially closed configurations SIC Grommet L2 HS02-43: 4 mm + 4 mm, for double 4 mm cable routing SIC Grommet L3 HS02-44: 4 mm + 4 mm + 3 mm, for mixed brake/derailleur combinations SIC Grommet R1 HS02-45: 5 mm, ideal for single brake cable housing SIC Grommet R2 HS02-46: 4 mm + 5 mm, for derailleur + brake combinations SIC Grommet R2e HS02-47: 3 mm + 5 mm, for thinner cable + brake housing SIC Grommet R3 HS02-48: 4 mm + 3 mm + 3 mm, for configurations with multiple control cables Compatibility and assembly must be verified following the specific Orbea model Bluepaper COMPATIBILITY: Compatible with standard non-OC HS02 stems and round spacers HANDLEBAR ROTATION LIMITATION: Spinblock function not available INCLUDED ACCESSORIES: Includes SIC grommets for every cable routing combination INCLUDED SIC GROMMET MODELS: HS02-49, HS02-42, HS02-43, HS02-44, HS02-45, HS02-46, HS02-47, HS02-48 ASSEMBLY WARNINGS: Check compatibility with your bike and follow Orbea assembly instructions

Der DT Swiss Ratchet LN MTB Freilaufkörper ist ein originales Bauteil, das entwickelt wurde, um maximale Zuverlässigkeit, Präzision und Langlebigkeit im Antriebssystem der DT Swiss Laufräder zu gewährleisten. Kompatibel mit dem Shimano Micro Spline Standard, ist er die ideale Lösung, um den Naben-Driver aufzurüsten oder zu ersetzen und dabei eine dauerhaft hohe Performance sowie einen gleichmäßig leichten Tritt zu sichern. Für den MTB-Einsatz konzipiert, ist dieser Freilaufkörper kompatibel mit 12x142 mm und 12x148 mm Boost Achsstandards und wird aus hochwertigen Materialien gefertigt, um extremen Belastungen, technischen Trails und intensiver Nutzung standzuhalten. HAUPTMERKMALE DT Swiss Freilaufkörper mit Ratchet LN Technologie Kompatibel mit Shimano Micro Spline MTB 12-fach Kassetten Hochfeste Aluminiumkonstruktion Kompatibel mit Naben in 12x142 mm und 12x148 mm Boost Standard Ratchet LN System für zuverlässigen Eingriff und gleichmäßige Lastverteilung Ideal für Ersatz oder Umrüstung des DT Swiss Naben-Drivers KOMPATIBILITÄT Kompatibel mit DT Swiss Naben, die mit dem Ratchet LN System ausgestattet sind. Vor der Montage sollte stets die Kompatibilität der Nabe überprüft werden, um eine einwandfreie Funktion des Systems zu gewährleisten.

The Orbea Bearing Kit Linkage Full Susp. 20 is the bearing kit designed to restore your full suspended bike to its original performance. Designed for frames with the Concentric Boost 2 system, it precisely and reliably replaces the bearings of the linkage and frame pivot points, eliminating play, creaks, and friction that spoil the ride. Whether you are performing preventive maintenance or restoring a bike after many intense rides, this kit allows you to bring smoothness back to the suspension and precision to the handling, maintaining the feel and quality of operation intended by Orbea. ORBEA KIT BEARINGS LINKAGE FULL SUSPENSION 20 main features: Bearing kit for linkage and frame pivot points Compatible with Orbea frames equipped with Concentric Boost 2 system Restores the smoothness of the linkage and the sensitivity of the suspension Reduces play, noises, and premature wear of moving parts Original Orbea components for maximum compatibility and durability Ideal solution for periodic maintenance or complete replacement of bearings

The Orbea Lower Bearing 1-1/2 + crown Race is the original spare part designed to always keep your bike's steering smooth and precise. If you use your Orbea on technical trails, marathons, or fast XC routes, the lower part of the headset is constantly stressed: having a quality bearing, with exact dimensions and perfect frame compatibility, is essential to avoid play, creaks, and premature wear. This lower bearing with integrated crown race is designed to fit perfectly the latest generation Orbea frames, ensuring easy installation, long life, and performance always up to expectations. Main features of ORBEA LOWER BEARING 1-1/2 + CROWN RACE: Original Orbea replacement for the lower part of the headset Bearing dimensions: 40 x 52 x 7 mm Compatible with Orbea Oiz OMX frame (Model Year 2021) Compatible with Orbea Oiz OMR frame (Model Year 2019–2021) Compatible with Orbea Alma OMR frame (Model Year 2021) Compatible with Orbea Alma OMX frame (Model Year 2021) 1-1/2" standard with included crown race for precise installation Ensures smooth steering and reduces play over time

M18 mounting bolt for the rear derailleur hanger, for road bike frames with 12 mm through-axles.

The Mahle Pulsar One ANT+ without Bracket Display from Orbea is the ideal companion for those who want to always keep the data of their e-bike with Mahle X35 or X20 system under control. Compact, clear and intuitive, it allows you to manage the assistance and monitor the main driving information at a glance, without distractions. Thanks to ANT+ LEV and Bluetooth connectivity, it easily integrates with other compatible devices, turning your cockpit into a true control center. Designed to be perfectly matched to Mahle systems, it is the right choice for those looking for a reliable, modern display ready to follow you on every ride. DISPLAY MAHLE PULSAR ONE ANT+ ORBEA EBIKE main features: Mahle Pulsar One Display for data visualization and control of Mahle X35 and X20 systems Compatible with e-bikes equipped with Mahle X35 and Mahle X20 systems ANT+ LEV connectivity for integration with compatible devices and sensors Bluetooth connectivity for connection to smartphones and other accessories Mahle reference: 33010000000000 Supplied without bracket, to be combined with the relevant mount Check the assembly instructions in your bicycle's Bluepaper technical manual is recommended Installation should be entrusted to an authorised dealer in case of lack of specific technical skills CONNECTIVITY: ANT+ LEV, Bluetooth COMPATIBILITY: Compatible with Mahle X35 and X20 systems

The Rear Derailleur Hanger Nº50 X12 MTB STD by Orbea is the small component that makes a big difference on your mountain bike. Designed for MTB frames with a 12 mm thru-axle, this hanger is meant to protect the derailleur and the frame in case of impacts or falls, while ensuring precise alignment of the rear derailleur. Ideal as an original replacement or as a spare part to always carry with you on longer rides, it allows you to quickly restore the transmission function and get back to pedaling worry-free. ORBEA REAR DERAILLEUR HANGER Nº50 X12 MTB main features: Original Orbea derailleur hanger for MTB frames Compatible with standard derailleurs (no Direct Mount) Designed for frames with 12 mm X12 thru-axle Thread pitch 1.5 for maximum compatibility with dedicated axles Protects frame and derailleur in case of impacts or falls Ensures correct alignment of the rear derailleur Ideal spare to always have available in your workshop or backpack FRAME COMPATIBILITY: MTB with 12 mm thru-axle, 1.5 thread pitch COMPATIBLE DERAILLEUR TYPE: For standard derailleurs (no direct mount) MATERIAL: 7075 Aluminum HANGER MODEL: Nº50 X12 MTB STD

The Rear Derailleur Hanger Nº47 X35 Road STD by Orbea is the small component that makes a big difference in the reliability of your bike. Designed to work in perfect harmony with Orbea frames equipped with a quick release rear wheel or Mahle Ebikemotion X35 motor, this derailleur hanger protects the frame in case of impacts and ensures precise derailleur alignment. Having a spare hanger always ready in the workshop or backpack means riding more peacefully, knowing you can quickly resolve any unforeseen issues and get back on the saddle immediately. ORBEA REAR DERAILLEUR HANGER Nº47 X35 ROAD STD main features: Original Orbea derailleur hanger, model Nº47 Compatible with Orbea frames with QR (quick release) rear wheel Compatible with bikes equipped with Mahle Ebikemotion X35 motor Ensures proper alignment of the rear derailleur Designed to protect the frame in case of impacts or falls Ideal spare part to always have available for emergencies Simple installation for quick restoration of gear functionality COMPATIBILITY: Compatible with QR rear wheel or Mahle Ebikemotion X35 motor USAGE: For road bikes MATERIAL: Aluminum (presumed)

The Rear Derailleur Hanger Nº52 X12 MTB STD by Orbea is the small component that makes a big difference on your mountain bike. Designed for frames with a 12mm thru-axle, this derailleur hanger ensures a precise alignment of the rear derailleur, protecting the frame in case of bumps or falls. Whether you are replacing a damaged hanger or simply want to always have a spare ready in your backpack, this specific model guarantees perfect compatibility with Orbea frames designed for X12 and a smooth, reliable shifting performance on your MTB rides. ORBEA DERAILLEUR HANGER N°52 X12 MTB main features: Original Orbea derailleur hanger Nº52 Compatible with Orbea MTB frames with 12mm thru-axle (X12 standard) Designed for rear derailleur on thru-axle frames Protects the frame by absorbing shocks in case of fall or impact Precise derailleur alignment for smooth and silent shifting Ideal as an emergency spare to carry on rides Robust and reliable construction for off-road use

The Rear Derailleur Hanger Nº53 X12 Road STD by Orbea is the standard derailleur hanger designed for road bikes with a 12mm thru-axle. A small component, but essential for shifting precision and frame safety: in case of impact or fall, it is the hanger that deforms to protect the frame and the derailleur. Having an original Orbea replacement hanger means you can quickly get back on the saddle, maintaining the derailleur's perfect alignment and the shifting quality you expect from your road bike. Ideal to install as a spare or always carry with you on longer rides and trips. Rear Derailleur Hanger ORBEA REAR DERAILLEUR HANGER Nº53 X12 ROAD STD: Standard derailleur hanger (no direct mount) specific for Orbea road models Compatible with frames equipped with 12 mm rear thru-axle (X12) Designed to ensure precise rear derailleur alignment Safety component: deforms in case of impact to protect frame and derailleur Original Orbea spare part for maximum compatibility and reliability Recommended as a spare part to always have available during trips and races COMPATIBILITY: For road bikes with 12mm thru-axle, compatible with standard derailleurs (no direct mount) MATERIAL: Aluminum MOUNTING TYPE: Standard (no direct mount)

The Orbea Rear Derailleur Hanger Nº55 X12 Road STD is the small component that makes a big difference in shifting precision and the safety of your frame. Designed for Orbea road frames with a 12 mm thru-axle, this hanger is the ideal solution to restore derailleur alignment after a fall or impact, keeping the drivetrain smooth and quiet. Manufactured according to Orbea's original specifications, it guarantees perfect compatibility with prepared frames and standard derailleurs (non-direct mount), so you can get back to riding with the same reliability as the first day. An essential spare to always have on hand, especially if you love to travel or participate in gran fondos and races, where a spare hanger can save your ride. ORBEA REAR DERAILLEUR HANGER N°55 X12 ROAD STD main features: Original Orbea rear derailleur hanger Nº55 for road frames with a 12 mm X12 thru-axle Compatible with standard derailleurs (no direct mount) Thread pitch 2P1.0 Speed Release for proper interface with the axle Designed to ensure precise derailleur alignment and smooth shifting Specific spare for Orbea frames: check your bike’s technical Bluepaper to verify compatibility Installation by an authorized dealer is recommended if you lack the necessary technical skills Essential component to protect the frame in case of impacts or falls affecting the drivetrain DERAILLEUR COMPATIBILITY: Compatible with standard derailleurs (no direct mount) THRU-AXLE DIAMETER: 12 mm THREAD PITCH: 2P1.0 Speed Release COMPATIBLE FRAME TYPE: Road bike

Maintain maximum fluidity and precision of your MTB's rear suspension with the original Orbea X9830000 bearing kit, specifically designed for the shock rocker of the latest generation Rise Carbon and Occam models. A fundamental component to ensure smoothness, suspension sensitivity, and reliability even on the most demanding rides. This kit uses Enduro Double Row MAX bearings, designed to withstand the high loads typical of full-suspension MTB suspensions, offering greater durability and superior performance compared to standard bearings. Ideal for restoring proper suspension system function and preventing play or noise in the rear triangle. Key Features Original Orbea bearing kit for shock rocker High-strength Enduro Double Row MAX bearings Bearing dimensions: 10x17x6/7 mm Designed for MTB Trail and e-MTB use High smoothness and long-lasting durability Ideal for suspension maintenance or overhaul Guaranteed compatibility with selected Orbea Rise and Occam frames Compatibility Orbea OCCAM SL Alloy HYDRO 29 2024 Orbea OCCAM LT Alloy HYDRO 29 2024 Orbea OCCAM SL Carbon OMR 29 2024 Orbea OCCAM LT Carbon OMR 29 2024 Orbea RISE Carbon OMR 29 from 2021 Orbea RISE Alloy HYDRO 29 from 2022 Orbea RISE Carbon OMR 29 from 2022 to 2025 To ensure correct installation and compatibility, it is advisable to check the Orbea Bluepaper technical manual for your specific bicycle. Installation must be carried out with appropriate tools and specific expertise.

The Orbea HS02 ICR Bearing Kit (52x40x7mm. 45º/45º) + Crown Race 1.5 45º is designed for those who want to keep their steering smooth, precise, and quiet as on the first day. Designed for ICR (Internal Cable Routing) systems, this bearing and crown race set ensures clean cable integration and smooth rotation of the headset, ideal for those who ride intensely on road or off-road. The precise tolerances and 45x45° angle ensure compatibility with modern headsets and provide safe, stable, and responsive riding, whether on long rides or the most demanding descents. ORBEA HS02 ICR BEARING KIT 52X40X7MM 45°/45° main features: Original Orbea kit for ICR (Internal Cable Routing) headset systems Bearing with dimensions 52x40x7 mm for integrated headsets 45º/45º angle (45x45°) for compatibility with modern standards Included 1.5” crown race with 45º angle Smooth and precise rotation for stable and controlled riding Ideal for replacement and maintenance of Orbea headsets and compatible models Clean solution for internal cable routing in the headset UPPER BEARING MATERIAL: Stainless Steel BEARING TYPE: Angular Contact Bearing UPPER BEARING OUTER DIAMETER: 52 mm UPPER BEARING INNER DIAMETER: 40 mm UPPER BEARING THICKNESS: 7 mm CONTACT ANGLE: 45º/45º SHIS CODE: IS52/40 ENDURO CODE: ACB 4545 150 SS 40x52x7 1.5" FORK CROWN RACE 45º: Included