Specialized
BICYCLE SPECIALIZED TURBO LEVO PR...
€7.452,00
€9.200,00
BICYCLE SPECIALIZED TURBO LEVO PRO CARBON
The BICYCLE SPECIALIZED TURBO LEVO PRO CARBON is the MTB that perfectly embodies Specialized's motto "The unbelievable power to ride more trails" because it is the perfect combination of handling quality, fully usable power, and excellent range.The Turbo Full Power motor and the TCU MasterMind amplify pedal push up to 4 times, allowing you to pedal easily anywhere. The battery range allows riding up to 5 hours on trails. The bike features 150 mm of rear travel with custom tuning and adjustable geometry and mounts SRAM Eagle X01 12-speed drivetrain, FOX Factory suspension and Roval Traverse carbon wheels.
BICYCLE SPECIALIZED TURBO LEVO PRO CARBON MAIN FEATURES:
The integrated Turbo Full Power motor with 700Wh battery and the advanced control unit, the TCU MasterMind, deliver 90 Nm of torque and 565 watts of power for up to five hours of range, to ride longer and faster.
The TCU Mastermind, with a customizable display, lets you view the exact battery percentage and features the new MicroTune on the handlebar to adjust assistance in 10% increments to deliver exactly the needed power at any moment. The rear 27.5" mullet design and 29" front wheel make handling agile. The generous handlebar places the rider at the center of the bike to optimize traction and cornering control. The low bottom bracket, relaxed head angle and reduced fork offset guarantee stability on technical terrain.
The bike allows you to adjust geometry across six settings to fine-tune performance based on riding style and terrain. The head angle can be adjusted between 63 and 65.5 degrees. The bottom bracket height can be increased or decreased by 7mm.
The 150mm travel of the Turbo Levo absorbs both small impacts and large squared obstacles, while delivering an incredible pedal response, with total efficiency.
THE BIKE IS DELIVERED PRE-ASSEMBLED BY US*
TECHNICAL SPECIFICATIONS
FRAME
HEADSET: Alloy, 38.6mm.
FORK: Fox 38 Factory, Grip 2 damper, 29", 160mm travel, Kashima, 44mm offset.
FRAME: FACT 11m full carbon, 29" front wheel, 27.5" rear wheel, full internal cable routing, 148mm spacing, fully sealed cartridge bearings, 150mm of travel, geo adjust head tube, geo adjust horst pivot.
DRIVETRAIN
CONTROLS: SRAM AXS POD Controller.
CHAIN: SRAM X0 Eagle Transmission Flattop Chain.
CASSETTE: SRAM X0 Eagle Transmission Cassette, 12spd, 10-52t.
REAR DERAILLEUR: SRAM X0 Eagle Transmission.
CHAINRINGS: SRAM Eagle Transmission 34t Steel, 104BCD.
CRANKSET: Praxis Carbon/Custom Offset/ISIS Spindle Interface, 160mm.
WHEELS
RIMS: Standard, Presta Valve.
FRONT WHEEL: Roval Traverse Carbon 29.
REAR TIRE: Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 2Bliss Ready, 27.5x2.6".
FRONT TIRE: Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.6".
REAR WHEEL: Roval Traverse Carbon 27.5.
FRONT HUB: DT Swiss 350, sealed cartridge bearings, 15x110mm spacing, 28h.
REAR HUB: DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h.
ELECTRONICS
UI/REMOTE: Specialized MasterMind TCU, percentage of remaining charge, 120 possible display configurations, MicroTune assist adjustment, over-the-air updates, ANT+/Bluetooth®, w/Handlebar remote
MOTOR: Specialized 2.2 Custom Rx Trail Tuned Motor.
BATTERY: Specialized M3-700, Integrated battery, 700Wh.
CHARGER: Custom charger, 42V4A w/ Rosenberger plug, 100-240V.
CABLING: Custom Specialized wiring harness.
ACCESSORIES
SWAT: SWAT CC steerer tube integrated tool with chain tool and link.
BRAKES
FRONT BRAKE: SRAM Code Silver Stealth, 4-piston caliper, hydraulic disc, 220mm.
REAR BRAKE: SRAM Code Silver Stealth, 4-piston caliper, hydraulic disc, 200mm.
COCKPIT
HANDLEBAR: Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 780mm, 35.0mm.
STEM: Deity, 35.0mm.
SADDLE: Bridge, 155/143mm, Hollow Ti-rails.
SEATPOST: Bike Yoke Revive dropper Post, 34.9mm diameter, S2/S3: 160mm, S4/S5: 185mm, S6: 213mm.
GRIPS: Deity Grips.
SUSPENSION
SHOCK: Fox Float X2 Factory, Kashima, 210x55mm.
SIZE CHART
SIZES
HEIGHT
S1 (XS)
150-160 CM
S2 (S)
157-173 CM
S3 (M)
165-180 CM
S4 (L)
173-188 CM
S5 (XL)
178-193 CM
S6 (XXL)
188-203 CM
*PRO-M STORE OFFERS FREE PRE-ASSEMBLY SERVICE FOR THE BIKE: SEATPOST, FORK, DERAILLEUR, AND BRAKES ARE ALREADY MOUNTED
ARTICLE CODE
95223-1102 (S2 - Color: GLOSS RUSTED RED / SATIN REDWOOD) / 95223-1103 (S3 - Color: GLOSS RUSTED RED / SATIN REDWOOD) / 95223-1104 (S4 - Color: GLOSS RUSTED RED / SATIN REDWOOD) / 95223-1105 (S5 - Color: GLOSS RUSTED RED / SATIN REDWOOD)
Specialized
SELLA SPECIALIZED POWER EXPERT MI...
€153,00
€180,00
SELLA SPECIALIZED POWER EXPERT MIRROR
The SELLA SPECIALIZED POWER EXPERT MIRROR combines maximum comfort and performance and is perfect for both professionals and enthusiasts. The shape of the saddle has been designed according to Body Geometry criteria and, together with Mirror technology, creates proper support for the ischial tuberosities, ideal for both off-road and on-road. Compared to traditional saddles, this model significantly reduces the pressure that causes pain. Inside the saddle there are two droplet-shaped inserts and the Mirror technology is positioned in the contact area of the ischial tuberosities. The saddle features a central opening and the patented Body Geometry design reduces pressure and improves blood flow. Thanks to the Body Geometry methodology, Retül data, and decades of work and experience from Specialized, the 3D-printed matrix designed to distribute pressure where the ischial tuberosities rest over a larger surface creates a hammock effect so that it is the saddle that supports the weight, not the tissue around the bones.
SELLA SPECIALIZED POWER EXPERT MIRROR MAIN FEATURES:
Patented Body Geometry construction, medical tests conducted in the laboratory to verify proper blood flow.
The droplet Mirror inserts provide correct support to the ischial tuberosities.
Saddle base compatible with SWAT™.
Lightweight and sturdy titanium springs.
Light polyurethane foam around the 3D inserts.
Size 130mm / weight 210g.
Size 143mm / weight 214g.
Size 155mm / Weight 225g.
Size 168mm / Weight 227g.
ARTICLE CODE
27123-8600 (Size: 130 mm - Color: Black) / 27123-8603 (Size: 143 mm - Color: Black) / 27123-8605 (Size: 155 mm - Color: Black) / 27123-8608 (Size: 168 mm - Color: Black)
Specialized
WHEEL MY22 SPECIALIZED RAPIDE CLX...
€789,47
Rim MY22 Specialized Rapide CLX LI 700c Front Carbon S213700018
Front carbon rim for disc brakes for wheel model Rapide CLX II.
Wheel size: 700C
Rim bed diameter (ETRTO): 622 mm
Number of spokes: 18
Rim material: carbon
Brake type: disc
Rim depth: 51 mm
Internal width: 21 mm
Rim type: clincher
Tubeless compatibility: yes
Specialized
SPECIALIZED S199900002 STM SUB BL...
€10,99
SPECIALIZED S199900002 STM SUB BLOCKS DISPLAY CRADLE FRONTPLATE
SPECIALIZED S199900002 STM SUB BLOCKS DISPLAY CRADLE FRONTPLATE
Specialized
BICYCLE SPECIALIZED CRUX DSW
from €2.078,99
€2.699,99
BICYCLE SPECIALIZED CRUX DSW
The Crux DSW is much more than the lightest alloy gravel bike ever made. We took everything we learned while creating the carbon Crux and made it in alloy, using our patented D'Aluisio Smartweld technology. We created the most capable, agile, balanced, and responsive alloy gravel bike ever made for fast, fun, and high-performance riding. And yes, it’s also the lightest. Some might call it a carbon copy, but we call it the Crux DSW.
Weight
At only 1399 grams*, the Crux DSW frame is the lightest alloy gravel frame in the world. Combined with our Fact12r Crux carbon fork and a high-performance build, the Crux DSW weighs 9.37 kg on the scale: no alloy gravel bike can compete.*56 cm size in the lightest color. Production frames may have tolerance.
Capacity
More space means more capacity: hence the Crux DSW has the same tire clearance as the carbon version: 47 mm and up to 2.1" with 650b wheel. With a sturdy, light alloy frame and wide-section tires, the Crux DSW can take you anywhere, at full speed.
Responsiveness
Responsive to pedaling and springy in the saddle. We used D'Aluisio Smartweld to highlight the alloy’s properties and offer a level of riding previously impossible without carbon, and to pair it with the same high-performance gravel geometry and the race-inspired, saddle-position used on carbon Crux bikes. A longer reach provides better weight distribution for quick, confident handling, while a lower stack creates an aggressive position. With a 72 mm bottom bracket drop, we reach the perfect balance of agility and stability.
D'Aluisio Smartweld
D'Aluisio Smartweld – or DSW – is a patented engineering process that uses hydroforming for maximum precision at tubing joints, for better and stronger welds and, ultimately, a lighter frame that can be twice as strong as a traditional alloy frame. Our Smartweld technology helps us create a curved tube and bottom bracket in one piece for the Crux, reducing weight and boosting responsiveness.
BICYCLE SPECIALIZED CRUX DSW MAIN FEATURES:
The lightest: Crux frame 1399g (raw). We took everything we learned creating the carbon Crux and made it in alloy, using our patented technology
D'Aluisio Smartweld patented. *size 56 - production frames may have tolerance.
Capable: Tire clearance 47c / 650b x 2.1 inches. More tire space means greater capacity – the Crux will take you wherever you want.
Responsive and agile: with gravel geometry and an aggressive, race-inspired positioning from iconic cyclocross racing in the Crux’s history.
THE BIKE IS DELIVERY PRE-ASSEMBLED BY US*
TECHNICAL SPECIFICATIONS
FRAME
Frame: Specialized E5 Premium Aluminum Disc frame with D'Aluisio Smartweld Technology, hydroformed aluminum tubing, tapered head tube, threaded BB
Saddle Collar: Specialized Alloy, 30.8mm.
COCKPIT
Saddle: Body Geometry Power Sport, steel rails.
Handlebar Stem: Specialized, 3D-forged alloy, 4-bolt, 7-degree rise.
Handlebar Curve: Specialized Adventure Gear, 118.9mm drop x 70mm reach x 12º flare.
Seatpost: Alloy, 2-bolt Clamp, 12mm offset, 27.2mm, anti-corrosion hardware.
Handlebar Tape: Supacaz Super Sticky Kush.
SUSPENSION
Fork: S-Works FACT Carbon, 12x100mm thru-axle, flat-mount disc.
BRAKES
Front brake: SRAM APEX, Hydraulic Disc.
Rear brake: SRAM APEX, Hydraulic Disc.
DRIVETRAIN
Shift levers: SRAM APEX, 12sp.
Rear derailleur: SRAM APEX XPLR, Mechanical.
Cogset: SRAM PG 1231, XPLR, 11-44.
Chain: SRAM APEX 12S.
Crankset: SRAM APEX XPLR, 40t.
Gears: 40t.
Bottom Bracket: SRAM DUB BSA 68 Wide.
WHEELS & TIRES
Front wheel: DT G540, Centerlock Disc, Tubeless Ready, 25mm internal width.
Rear wheel: DT G540, Centerlock Disc, Tubeless Ready, 25mm internal width.
Front tire: Pathfinder Pro 2BR, 700x38.
Rear tire: Pathfinder Pro 2BR, 700x38.
Tubeless valves: 48mm Presta Valve, 700X28-38.
ACCESSORIES
Pedals: PEDAL, TEST RIDE PEDALS PROVIDED BY SPECIALIZED.
WEIGHT
Weight: 9.37kg (20 lb, 10.5 oz).
Size weighed: 56.
*PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SADDLE, FORK, SHIFTER AND BRAKES ARE ALREADY MOUNTED
Specialized
SPECIALIZED GRAVITY TRAINING SHORTS
€139,39
€169,99
SPECIALIZED GRAVITY TRAINING SHORTS
The Gravity shorts are durable, breathable, and comfortable. Made from rugged Nylon Cordura, they are lightweight, stretchable, and abrasion-resistant. They offer a wide range of motion. The water-repellent treatment also protects you from mud on the trail. Laser perforations for ventilation on the kidneys and inside the leg. Elastic waistband, interior with silicone applications. Two side pockets with zip closure.
The fabric in rugged Nylon Cordura is lightweight, elastic, and abrasion-resistant.
Water-repellent treatment.
Laser perforations in strategic areas for ventilation
Elastic waist with internal silicone applications.
Compact and lightweight shorts
Two side pockets with zip closure.
Secure closure
Composition 84% Nylon Cordura, 16% Spandex
Specialized
SPECIALIZED ROVAL MY17 CLX50 DISC...
€650,00
€684,21
SPECIALIZED ROVAL MY17 CLX50 DISC 700C REAR WHEEL 24H - CARBON FIBER
Roval S173700023 MY17 CLX50 Disc 700c Rear Wheel 24H - Satin Carbon/Black Decal
Specialized
SPECIALIZED BUTCHER GRID GRAVITY ...
€59,50
€70,00
SPECIALIZED BUTCHER GRID GRAVITY T9 29X2.6 TIRE
The Butcher provides total confidence and control in all trail conditions. With 12% more of our adhesive‑compound tread to the ground, it excels whether you’re carving well‑set corners, tackling difficult terrain, or pushing through mud after the storm. Rely on the Butcher to give you the grip and security needed to tackle any challenge with conviction.
Butcher Grid Gravity T9 TLR Enduro Tire key features:
Use - Enduro, Park, DH, and e-MTB.
Terrain - Mountain - Broad spectrum conditions.
Casings - Tough 2-ply 60 TPI casing for extreme conditions.
Compound - GRIPTON T9 for maximum grip.
Type - Tubeless.
Wheel pairing suggestions - Roval Traverse SL II and Traverse HD.
CODE 00125-0042
Specialized
SPECIALIZED SPECIALIZED S20060000...
€40,04
€44,99
SPECIALIZED SPECIALIZED S200600005 BEARING KIT STUMPJUMPER CARBON 2021
Frame bearing kit compatible with Specialized Stumpjumper comp, expert, pro and s-works 2021.
ARTICLE CODE:
S200600005
Barcode:
888818722488
Specialized
SPECIALIZED S204300002 SHOCKLINK ...
€60,20
€70,00
SPECIALIZED S204300002 SHOCKLINK FOR EPIC EVO
Shock Link for Specialized epic evo, compatible with models in the 2021 series up to 2023.
ARTICLE CODE:
S204300002
Bar Code:
888818700783
Specialized
SADDLE SPECIALIZED PHENOM COMP 143
€106,25
€125,00
SADDLE SPECIALIZED PHENOM COMP 143
The SADDLE SPECIALIZED PHENOM COMP 143, sturdy and comfortable, is perfect for mounting on MTB. The seat shell has been reinforced with carbon fibers; the outer edges are elastic and closely follow the rider's body profile. The saddle is equipped with Cr-Mo tubular springs and a level-two padding for XC racing. The design prevents the shorts from snagging, and the construction is rigid and efficient.
SADDLE SPECIALIZED PHENOM COMP 143 MAIN FEATURES:
Body Geometry construction, medical tests conducted in the laboratory to verify proper blood flow.
Reinforced carbon fiber shell with elastic edges: the saddle follows the body's contours for efficiency and comfort.
Tip and rear part covered with low-friction material to improve pedaling efficiency and saddle out).
Tubular Cr-Mo springs.
Light polyurethane padding for greater comfort over long distances.
Level 2 medium-density padding, comfort and control.
The base is SWAT compatible for integrated solutions to carry essentials on the trail.
Version 143mm - Indicative weight 254g.
ARTICLE CODE
27217-2303
Specialized
SPECIALIZED AIR TOOL CPRO2 PUMP W...
€44,99
SPECIALIZED AIR TOOL CPRO2 PUMP WITH PRESSURE GAUGE
The SPECIALIZED AIR TOOL CPRO2 PUMP WITH PRESSURE GAUGE allows you to check proper tire inflation thanks to the pressure gauge. Trigger operation and included 16 g CO2 canister.
SPECIALIZED AIR TOOL CPRO2 PUMP WITH PRESSURE GAUGE MAIN FEATURES:
The gauge helps manage the pressure.
Horizontally swiveling gauge.
Trigger operation provides perfect control.
Compatible with 16 and 25c cartridges.
Compatibility with standard threaded CO2 cartridges.
Sold with a 16c cartridge.
ARTICLE CODE
47219-4050
Specialized
SPECIALIZED FAST TRAK GRID LITE T...
€41,65
€49,00
SPECIALIZED FAST TRAK GRID LITE T5/T7 TIRE 29X2.2
Experience unparallel speed, control, and efficiency on mixed terrain with Fast Trak, the definitive XC race tire. The optimized tread pattern design and reduced knob height lower weight by 110 g and improve rolling resistance by 5%, delivering faster acceleration, superior handling, and top performance in any condition.
Fast Trak Grid Lite T5/T7 TLR XC key features:
Usage: XC races and rides
Terrain: Mountain
Compound: GRIPTON T5/T7
Type: Tubeless
Recommended use on wheels Roval Control World Cup and Roval Control SL
CODE 00125-4100
Specialized
REAR WHEEL SPECIALIZED CLX II 700C
€1.500,00
REAR WHEEL SPECIALIZED CLX II 700C
With the new Alpinist CLX II wheels you’ll feel your bike “come alive,” thanks to the ultra-light tubeless-ready rims we’ve ever made. Explosive acceleration, magic in corners, sublime on rough roads, all with the performance of a tubeless system. For climbs these wheels don’t carry a gram of excess, because perfection is reached when you can’t remove anything else.
Lightness alone isn’t enough to obtain the responsiveness and handling of the Alpinist CLX II tubeless wheels. The pair was designed as a system and our engineers tested every part – hubs, rims, spokes – and development started from Tubeless tires. The result is a wheelset weighing 1250 grams, with unmatched ride quality.
The tooth design of the Alpinist CLX II (which allows reaching a pressure of 110 psi if that’s what you want) guarantees perfect tire grip and easy installation. All this in a light wheelset that nearly doubles the current strength standards.
The new AF hubs are 50 grams lighter than the previous Alpinist CLX hubs. The bearings are SINC Ceramic, the internals DT Swiss EXP.
REAR WHEEL SPECIALIZED CLX II 700C MAIN FEATURES:
Rims: Alpinist CLX Carbon Clincher, 700c, disc brake, Tubeless
Rim details: Depth 33mm, External Width 27mm, Internal Width 21mm
Roval Light Hub (LFD13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t (10 deg), 100x12mm & 142x12mm, 11SP Shimano freehub
DT Swiss SINC Ceramic bearings
DT Swiss Aerolite T-head spokes, Front Radial/One-cross (2:1) 21 spokes driving side 276mm, opposite side 290mm - Rear One-cross/Two-cross (2:1), driving side 288mm opposite side 286mm
DT Swiss Hex Prolock nipples Al 2.0x14mm
Tires: section 24mm - 38mm / Maximum pressure: 24mm-35mm: Tubeless (110psi) with Tube (130psi) / 36mm-38mm: Tubeless (60psi) with tube (60psi)
Pair weight 1,265g, Front 571g, Rear 694g (incl. Tubeless tape and valve 15g)
Hand-built
Extras: Roval rim tape, Spoke and nipple kit
Maximum load 125kg
Specialized
SPECIALIZED S160600002
€18,00
SPECIALIZED S160600002
The oversized custom bearing for BB30 and OSBB frames is designed to deliver optimal and durable performance. With the Specialized brand, you can be confident in the quality and reliability of this essential component for your bike.
S160600002 key features:
Custom bearing designed for BB30 and OSBB frames
Ensures optimal and durable performance
Specialized brand guarantees quality and reliability
Specialized
SPECIALIZED GLOVES SL PRO
from €20,00
€40,00
SPECIALIZED GLOVES SL PRO
The Specialized SL Pro road gloves are a high-end product designed to offer optimal performance during your rides. They are ultralight and breathable, ensuring a comfortable and fresh feel even on the hottest days. The SL Pro glove palm is made with LifeLine technology: a nubby synthetic suede leather that provides total control on the handlebars and high sensitivity. This makes the gloves the preferred choice of professional riders who need maximum precision and control during their races. The palm is extremely thin and made of Clarino synthetic leather to guarantee maximum control on the handlebars. It is also perforated in strategic areas to promote perfect ventilation and keep hands dry even during the most intense workouts. The LifeLine palm construction ensures a perfect fit, like a second skin. The back of the gloves is made of elastic mesh fabric, which promotes breathability and keeps hands cool and dry. The SL Pro gloves have a snug, stretchable cuff that fits perfectly around the wrist without constricting excessively. Additionally, the finger configuration is specially designed to allow easy and quick removal of the gloves.
SPECIALIZED SL PRO GLOVE MAIN FEATURES:
LifeLine palm in nubby synthetic suede leather for total control and high comfort.
Thin Clarino synthetic leather palm for maximum control on the handlebars.
Perforated palm for perfect ventilation.
LifeLine palm construction for a second-skin fit.
Elastic back in knit fabric for breathability.
Snug, elastic cuff.
Finger shaping designed to easily remove the gloves.
Specialized
SPECIALIZED S-WORKS FUTURE STEM 3...
from €120,00
€150,00
SPECIALIZED S-WORKS FUTURE STEM 31.8 6 DEGREE HANDLEBAR STEM
Brand-new road handlebar mount, rigid and lightweight, compatible with Future Shock devices.
SPECIALIZED S-WORKS FUTURE STEM 31.8 6 DEGREE MAIN FEATURES:
Perfect integration with Future Shock devices.
Very rigid for responsive handling.
Compatible with Specialized mounting for various accessories.
Upward tilt of 6 degrees.
Lengths from 90 to 120 mm.
Approximate weight 145 g (100mm).
*If you want to change the handlebar mount length of your current Roubaix 2020 equipped with Future Stem, you don't need other components.*If you want to switch to a Future handlebar mount on your bike equipped with Future-Shock, contact your local dealer to obtain the required spacer (part number: S204800001).
Specialized
SPECIALIZED CB SL BLUR BICYCLE SH...
€59,78
€122,00
SPECIALIZED CB SL BLUR BICYCLE SHORTS
Perfect shorts are those that make you feel free and comfortable. The comfort of SL shorts comes, among other things, from a pre-formed chamois that follows the contours of the body and saddle, with differentiated-density padding. The upper part is heat-welded, seamless, and the construction is specifically designed for the riding position. The seamless heat-welded upper prevents skin irritation. The fabric with carbon is antimicrobial and thermoregulating. The silicone infusion in the fabric at the lower leg ensures a perfect fit.
COMPOSIZIONE
MAIN 78% Nylon, 22% Spandex - UPPER PART 95% Polyester, 5% Spandex
Specialized
SPECIALIZED SHORTS WITH PRIME SWA...
€126,00
€140,00
SPECIALIZED SHORTS WITH PRIME SWAT FOR DONNA BICYCLE
Bib shorts with straps, featuring strategic pockets on the legs and back. The elastic straps and the top part of the shorts are soft, and do not irritate the skin. Carry your mobile phone, a inner tube, and snacks, conveniently in the Prime SWAT shorts pockets. The lower leg hem is elasticated with a non-slip silicon interior. The Body Geometry Contour 3D padding with differentiated density is comfortable and provides support even for long rides.
KEY FEATURES
Mesh fabric pockets on the legs and back.
Elastic and soft straps.
Rear construction of the straps ensures a perfect fit and hold.
Full freedom of movement
Lower leg hem is elasticated, with silicone applications inside for hold.
Slightly compressive
Body Geometry Contour 3D Women padding
Main composition 46% nylon, 38% polyester, 16% elastane. Remaining 73% Nylon, 27% Spandex.
Specialized
SPECIALIZED S240500004 MOTOR BOLT...
€54,72
€72,00
SPECIALIZED S240500004 MOTOR BOLT KIT TURBO LEVO FSR GEN3
The BLT KIT motor mounting kit, MY22 LEVO FSR (GEN.3) includes all bolts, washers, and spacers required for Levo Gen.3 bikes with alloy and carbon frames. This new kit includes three 1.5 mm thick alloy spacers necessary for bikes with alloy frames that were not included in the original S210500010 hardware kit. It is normal to have three spacers remaining after using this kit: Alloy frame - you will have 3 spacers with 18 mm outer diameter x 10.5 mm inner diameter x 0.2 mm thick. Carbon frame - you will have 3 spacers with 18 mm outer diameter x 10.5 mm inner diameter x 1.5 mm thick.
SPECIALIZED S240500004 MOTOR BOLT KIT TURBO LEVO FSR GEN3 main features:
Includes all bolts, washers, and spacers required for Levo Gen.3 bikes with alloy and carbon frames.
Contains three 1.5 mm thick alloy spacers for bikes with alloy frames.
Three spacers remain after using the kit, depending on the frame type.
Specialized
SPECIALIZED S201900002 DERAILLEUR...
€15,80
€20,00
SPECIALIZED S201900002 DERAILLEUR COVER TARMAC SL7
Pressure-fit cosmetic cover for the front derailleur mounts in the Tarmac SL7 used for 1x drivetrains on various road bike models. Easy tool-free installation. Covers unused threaded inserts for the front derailleur mounts on the seat tube.
SPECIALIZED S201900002 DERAILLEUR COVER TARMAC SL7 main features:
Part number S201900002
Compatible with Tarmac SL7
Pressure-fit cosmetic cover
Easy tool-free installation
Covers unused threaded inserts for the front derailleur mounts on the seat tube
PART NUMBER:
S201900002
Barcode:
888818701643
Specialized
SPECIALIZED LONG-FINGER GLOVES TR...
€35,99
€44,99
SPECIALIZED LONG-FINGER GLOVES TRAIL D3O
The SPECIALIZED LONG-FINGER GLOVES TRAIL D3O feature D3O protection on the knuckles. The fingers have silicone prints for maximum control and grip on brake levers. The Ax Suede palm allows for excellent air circulation.
SPECIALIZED LONG-FINGER TRAIL D3O GLOVE MAIN FEATURES:
Neoprene cuff with adjustable closure.
Ax Suede palm.
Touch screen compatibility.
The protective D3O foam is strategically stitched into the Nylon fabric for greater finger protection.
Laser-perforated palm aids in perspiration and ventilation at the warmest points of the hands.
The silicone prints on the fingers provide maximum grip on the handlebars and brakes.
FABRICS
Dorsal: 90% nylon, 10% elastane.
Palm: 100% polyester.
ARTICLE CODE
67121-3202 (Size: S - Color: Black) / 67121-3203 (Size: M - Color: Black) / 67121-3204 (Size: L - Color: Black) / 67121-3205 (Size: XL - Color: Black) / 67121-3206 (Size: XXL - Color: Black)
Specialized
SPECIALIZED 3/4 TIGHTS WITH FOUND...
€99,00
€110,00
SPECIALIZED 3/4 TIGHTS WITH FOUNDATION