Products

HOPE FRONT HUB PRO 5 110 MM 28 HOLES The HOPE FRONT HUB PRO 5 110 MM 28 HOLES combines 30 years of experience with the needs of current and future cycling technologies. One of the main design goals of the Pro 5 hub was the reduction of aerodynamic resistance in the drive mechanism. To achieve this result, it was necessary to improve the sealing with a new zero-resistance labyrinth seal and an improved ratchet and pawl system with new springs.Another important update to the rear hubs is the increase in engagement points (from 44 to 108) thanks to a 6-offset pawl hub design, in which 3 pawls are engaged at any one time. In this way it is possible to achieve the right balance between pick-up speed, load capacity, strength and durability, and in real terms you get a feeling of speed on the trail while keeping crank movement at an acceptable level without compromising hub free movement or its reliability. The outer shell has a new profile to increase stiffness without increasing weight and the new axle design allows the use of larger bearings in a better arrangement to suit the latest freehub standards, while at the same time increasing load capacity. HOPE FRONT HUB PRO 5 15X110 MM 28 HOLES MAIN FEATURES: Stainless steel sealed cartridge bearings. Hub shell machined from forged aluminum billet. Standard 6-bolt disc mount. Larger spoke flange to allow the construction of stiffer wheels. Unbeatable reliability. Torq end cap. The hub flanges are moved 5 MM outwards compared to the standard 100 m front hub to increase wheel stiffness. 28 holes. Machined from 2014 T6 forged aluminum billet. Weight (approximate): 188 g. NB: in the order notes, indicate whether you want to purchase the 15 or 20 MM version.

HOPE FRONT HUB PRO 5 110 MM 32 HOLES The HOPE FRONT HUB PRO 5 110 MM 32 HOLES combines 30 years of experience with the demands of current and future cycling technologies. One of the main objectives in designing the Pro 5 hub was the reduction of rolling resistance in the drive mechanism. To achieve this result it was necessary to improve sealing with a new zero-resistance labyrinth seal and an improved ratchet and pawl system, with new springs.Another important upgrade of the rear mozzi consists in increasing the points of engagement (from 44 to 108) thanks to a 6-offset-pawl hub design, in which 3 pawls are engaged at any time. In this way it is possible to achieve the right balance between pickup speed, load capacity, strength and durability, and in real terms you get a feeling of speed on the trail while keeping crank movement at an acceptable level without compromising the hub’s freedom of movement or its reliability. The outer part of the shell has a new profile to increase stiffness without increasing weight, and the new axle design allows the installation of larger bearings in a better arrangement to fit the latest freehub standards, while at the same time increasing load capacity. HOPE FRONT HUB PRO 5 110 MM 32 HOLES MAIN FEATURES: Sealed stainless steel cartridge bearings. Hub shell machined from forged solid aluminum. Standard 6-bolt disc mounting. Larger spoke flange to allow the building of stiffer wheels. Unbeatable reliability. Torq end cap. The hub flanges are moved 5 mm further out compared to the standard 100 m front hub to increase wheel stiffness. 32 holes. Machined from forged 2014 T6 aluminum. Weight (approximate): 188 g. NB: specify in the order notes whether 15 or 20 mm

HOPE REAR HUB PRO 5 148 MM 28H BOOST The HOPE REAR HUB PRO 5 148 MM 28H BOOST is the result of 30 years of experience in the design and production of high-quality drivetrain components, with the aim of using proven technology to meet the needs of current and future cycling technology. MAIN FEATURES OF HOPE REAR HUB PRO 5 148 MM 28H BOOST: Improved sealing to prevent dirt ingress and reduce rolling resistance. The new labyrinth seal has zero resistance and ensures incredible freewheel performance. New pawl and spring design to increase durability, load capacity and reduce rolling resistance. Increased engagement from 44 to 108 with a new 6-offset-pawl hub design. Pawls cut flush in high-strength steel for maximum robustness. New stepped axle design for a stiffer and longer-lasting hub. New hub body profile for greater stiffness without increasing weight. Fully serviceable and rebuildable with simple tools. Spacers can be easily replaced to fit different frame and axle standards. 6-bolt disc mounting. NB: indicate in the order notes if you want the Sram XD, Shimano HG or Shimano MS freehub body

HOPE REAR HUB PRO 5 148 MM 32 HOLES BOOST The HOPE REAR HUB PRO 5 148 MM 32 HOLES BOOST is the result of 30 years of experience in the design and production of high-quality drivetrain components, with the aim of using proven technology to meet the needs of current and future cycling technology. MAIN FEATURES OF HOPE REAR HUB PRO 5 148 MM 32 HOLES BOOST: Improved sealing to prevent dirt from entering and reduce drag. The new labyrinth seal has zero resistance and guarantees incredible freewheel performance. New pawl and spring design to increase durability, load capacity and reduce drag. Increased engagement from 44 to 108 with a new 6-offset-pawl hub design. Flush-cut pawls in high-strength steel for maximum robustness. New stepped axle design for a stiffer and longer-lasting hub. New hub body profile for greater stiffness without increasing weight. Fully serviceable and rebuildable with simple tools. Spacers can be easily replaced to fit different frame and axle standards. 6-bolt disc mounting. NB: specify in the order notes if you want the Sram XD, Shimano HG or Shimano MS freehub body

HOPE REAR HUB PRO 5 148 MM BOOST 32 HOLES E-BIKE The HOPE REAR HUB PRO 5 148 MM BOOST 32 HOLES E-BIKE combines 30 years of experience with the needs of current and future cycling technologies. One of the main objectives in designing the Pro 5 hub was reducing drag in the drive mechanism. To achieve this result it was necessary to improve sealing with a new zero-resistance labyrinth seal and an improved ratchet and pawl system with new springs.Another important update to the rear hubs is the increase in engagement points (from 44 to 108) thanks to a 6-offset-pawl hub design, in which 3 pawls are engaged at any one time. In this way it is possible to achieve the right balance between pickup speed, load capacity, strength and durability, and in practical terms you get a fast feel on the trail while keeping crank movement at an acceptable level without compromising hub free movement or its reliability.The hub is sold with a freehub body specifically designed for e-bikes: all six pawls engage simultaneously, which both reduces lag and increases load capacity and durability. The freehub is made entirely of stainless steel for better stability and wear resistance.The outer part of the shell has a new profile to increase stiffness without increasing weight, and the new axle design allows for larger bearings to be mounted in a better arrangement to fit the latest freehub standards while at the same time increasing load capacity. HOPE REAR HUB PRO 5 148 MM BOOST 32 HOLES E-BIKE MAIN FEATURES: Hub shell machined from forged 2014 T6 Aluminium. 6-bolt disc brake system. Stainless steel sealed cartridge bearings. Labyrinth seal. NB: in the order notes indicate which freehub body you want to mount between shimano microspline, shimano hg steel and sram xd.

Specialized MY19 Traverse SL MTB Hub The rear hub Roval J-Bend Flange Mountain 1 (JFM01R) is designed to offer exceptional performance on Traverse MY19 wheels. With its cutting-edge technology, this hub is the ideal choice for tackling the most demanding terrain with confidence and control. Roval J-Bend Flange Mountain 1 (JFM01R) main features: Rear hub designed for Traverse MY19 wheels Compatible with disc brakes J-Bend Flange technology for increased strength and durability

SHIMANO DEORE 12S 32-HOLE REAR HUB XT FH-M8130-B CENTER LOCK E-THRU 12X157 MM Faster acceleration amplifies the excitement. The reduced spline diameter for the 10T sprocket by MICRO SPLINE ensures a simple setup and reliable performance in trail riding. With the easy installation of the disc brake rotor with spline mounting and CENTER LOCK type lock ring and a special extra-wide 157 mm over locknut dimension, this rear hub is compatible with 12-speed MICRO SPLINE cassettes. The SHIMANO SLX rear hub features SCYLENCE technology to increase system stiffness and provide a quieter experience in trail riding. SHIMANO DEORE 12S 32-HOLE REAR HUB XT FH-M8130-B CENTER LOCK E-THRU 12X157 MM main features: Faster acceleration for enhanced excitement Reduced spline diameter for the 10T sprocket by MICRO SPLINE Simple setup and reliable performance in trail riding Easy installation of the disc brake rotor with spline mounting and CENTER LOCK type lock ring Special extra-wide 157 mm over locknut dimension Compatible with 12-speed MICRO SPLINE cassettes SCYLENCE technology to increase system stiffness and provide a quieter experience in trail riding